Find or Sell Used Cars, Trucks, and SUVs in USA

Shelby Shelby Gt500 Gt500 Cobra on 2040-cars

US $24,000.00
Year:2010 Mileage:23000 Color: Blue
Location:

Albany, New York, United States

Albany, New York, United States

-MGW Short throw shifter-SVT Strut Tower Brace-TVS 2300 supercharger-Moroso (2) aluminum overflow tanks (intercooler & coolant)-TVS 2300 supercharger-VMP honed out supercharger elbow/inlet-L&M twin 72mm Throttle body-Bosch 80# fuel injectors with rail spacers-Custom Twin 310 fuel pumps-Whipple 123 Mass air intake-8k Mass air sensor-Afco Twin FanHeat Exchanger-Metco 2.8 supercharger pulley-Steeda pulley tensioner-Innovative West 10% Underdrive pulley-BMR Tubular K Member-BMR Tubular A Arms-Full BMR Chassis supports (WELDED IN) not bolted-Steeda Aluminum Lower control arms-American Racing stainless Headers 1 7/8 collectors-American Racing H-Pipe-ARP MainStud Kit-ARP Headstud kit-ARP Side bolts-McLeod RST Twin Disc Clutch kit with lightned flywheel-New Cast Iron 5.4. Block Block , torque plate bored and Honed-New 4340 Forged 4.165 stroke COBRA JET Crankshaft w/micro polished journals-New 4340 6.658 Manley H-beam Rods -New Forged MMR 2500R pistons with Chromoly pins -Total Seal file fit rings -Clevite Rod and Main bearings-Heads Ported and Polished to Stage 3-Ford GT Supercar Cams-MMR Hurricane Internal Billet Geared Oil Pump-MMR WindageTray-Ford SVT Track Pack Suspension including lowering springs, shocks, struts, adjustable strut mounts, bump stops and poly bushings-Steeda Rear Brake Upgrade kit with 13' rotors and caliper relocation kit, hawk pads stainless steel lines-Steeda front slotted rotors, stainless steel lines, hawk pads and all filled with race grade fluid-Cortex Watts Rear Link Suspension-373 Gears (stock were 355) With all new guts-4 Total Magnaflo mufflers, 2 center are 14" bullet and 2 out back. Idle and cruising have nice rumble but when you open throttle it screams. (ill send video if you like)-Savini 3 piece 19" Forged wheels with custom shelby emblems. Matte black center with Gloss black lip (Rims and tires were $6200) (I have stock rims as well)-Front tires are Vredestein, Rears are Nitto NT05R 305/30 Drag Radials-SCT Hand held tuner

Auto Services in New York

Xtreme Auto Sales ★★★★★

Used Car Dealers
Address: 5560 W Ridge Rd, Byron
Phone: (585) 820-8346

WaLo Automotive ★★★★★

Auto Repair & Service
Address: 202 Lake St.(In the Dell Electric Bldg.), North-Boston
Phone: (716) 312-0588

Volkswagon of Orchard Park ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 3524 Southwestern Blvd, South-Wales
Phone: (716) 662-5500

Urban Automotive ★★★★★

Auto Repair & Service
Address: 46 Jefferson St, Wellsville
Phone: (585) 593-3393

Trombley Tire & Auto ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 370 S Main St, Port-Gibson
Phone: (585) 394-4111

Tony`s Boulevard Service Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Inspection Stations & Services
Address: 276 Boulevard, Sterling-Forest
Phone: (866) 595-6470

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

Fri, 11 Jul 2014

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Did a US automaker blow the whistle on Hyundai, Kia fuel economy issue?

Mon, 17 Dec 2012

In all of the most hotly contested mainstream segments of the motoring universe, the difference of one mile per gallon averaged on a widow sticker can mean the difference between a sale and a walk-off - to say nothing of two or three mpg. So, when Hyundai and Kia were forced to reveal that many of their 40-mpg ratings were actually 38s and 37s, well, it made for big news.
It also, conceivably, made for a competitive disadvantage immediately, when the Korean automakers' products were being shopped versus the guys down the block. And it's that disadvantage that makes a recent story from Automotive News so juicy.
AN is reporting that Margo Oge, former head of the Environmental Protection Agency's Office of Transportation and Air Quality, got a tip in 2010 that Hyundai/Kia were "cheating" to get its impressive fuel economy numbers. The tip, said Oge (who retired from the EPA this past September), came from a senior vice president from a domestic automaker. The source was credible enough for Oge to launch an audit of the Hyundai figures, which ultimately lead to the debacle that we reported on a few months ago, and that the Korean company has been trying to bounce back from ever since.

Ford rethinking vehicle launch strategy

Tue, 07 May 2013

With a new boss at the helm, Ford is looking at new ways to improve its vehicle launches in North America to prevent recent issues that have popped up with models like the Lincoln MKZ, Ford Escape and Ford Fusion. Speaking with Automotive News, Ford's new president of the Americas, Joe Hinrichs, revealed a few ways the automaker plans to avoid early build issues such as the engine fires on certain 2013 Escape and Fusion models and months-long delays for customers to receive their MKZs.
It sounds like the root of the problems may have been Ford's relationship with suppliers compounded by the fact that the product surge came on the heels of the recent industry-crippling recession, and in the AN article, Hinrichs says improvements are being made to reduce problems during the launch of new or redesigned models. Three such improvements that were implemented during the first quarter of this year including more rigorous quality comparisons, better use of computer technology to catch major problems sooner and hiring engineers to work closer with suppliers.