1997 Honda Accord Lx Sedan Auto, 175k Miles, Runs And Drives Well, Nice Car on 2040-cars

Auto blog

Five automakers now being investigated by NHTSA for airbag woes

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."

Honda CR-Z carbon-fiber prototype

When Honda rolled out the CR-Z a few years ago, it hoped to bridge the gap between those who would save the planet and those who would rather burn all of its resources in a glorious cloud of tire smoke. But enthusiasts recalling the CRX of 1980s vintage balked, imploring Honda to ditch the heavy battery packs and electric motors in favor of a lighter-weight, more conventional powertrain. At this point it seems less likely that Honda would do so at one end of the market than Porsche would ditch the hybrid component of its 918 Spyder at the other. But that doesn't mean Honda isn't still cooking up ways to curb the CR-Z's weight. And it had just one such idea waiting for us when we visited its Japanese R&D center at Tochigi last week.
Nestled in between the JDM hatchbacks, powertrain test mules and new technology prototypes Honda rolled out for us sat the experimental CR-Z you see here. While it may look mostly like the hybrid sport-hatch you can pick up at your local dealer (albeit blacked out), nearly all of this prototype's bodywork has been completely replaced, as have its basic underpinnings, with carbon-fiber reinforced plastic. The exotic material is usually reserved for high-end exotics, but like BMW is democratizing its use in the new i3, so too is Honda researching ways to implement the use of carbon fiber on a mass scale. This one-of-a-kind CR-Z prototype stands, for the time being, as the embodiment of that effort.
Driving Notes

2014 Honda HPD CR-Z

Honda invited us to its Southern California North American headquarters last week to take a spin in a very special CR-Z - one modified with a full complement of Honda Performance Development (HPD) components. While the company has been racing with HPD parts for years, this is the first time the automaker has offered them for its street-legal vehicles, and it has chosen this year's SEMA Show in Las Vegas to be the launch venue. Last year, Honda introduced the HPD Supercharged CR-Z Concept at SEMA - this is the slightly modified production version.
The complete transformation gives the normally placid hybrid hatchback a serious shot of adrenaline thanks to a bolt-on supercharger combined with suspension, tire, brake and exhaust upgrades. In addition to the blower (detailed in a bullet point below), new HPD suspension components lower the car by about half an inch, and firmer spring rates stiffen the ride. Stock 16- or 17-inch wheels are then replaced with HPD 18-inch alloys wrapped in sticky Michelin Pilot Super Sport tires (215/40ZR18 at all corners). The clutch is upgraded, a limited-slip differential is installed and new HPD monobloc four-piston calipers are fitted over slotted and ventilated iron rotors up front (the single-pistons over solid discs on the back axle are unchanged). In the rear, the stock hidden single exhaust pipe is replaced by a free-flow twin-tip exhaust that peers out of a new HPD lower diffuser. Other cosmetic enhancements include an HPD front lip spoiler, rear deck lid spoiler and an HPD emblem kit for each side. To say the CR-Z is transformed by the complete HPD package is an understatement.
Driving Notes