2011 Infiniti M37x Awd Sedan All Wheel Drive on 2040-cars

Auto blog

About 20k Nissan Pathfinder, Infiniti JX models recalled for potentially faulty brakes

The National Highway Traffic Safety Administration has issued a recall for the 2013 Nissan Pathfinder and 2013 Infiniti JX due to a problem with the front brakes. The problem is a result of the brake torque member (a part that attaches the brake caliper to the front suspension), which was cast improperly with a structural weakness that could possibly lead to "reduced braking, increasing the risk of a crash," according to NHTSA. How, you ask? If the part breaks, the brake caliper could move position and possibly make contact with the wheel.
Around 20,000 of these sister crossovers are being recalled, but it doesn't sound like all were equipped with the faulty component. Dealers will inspect vehicles built between December 3, 2012 and January 29, 2013, and replace components from the defective batch. The recall goes into effect next month, but until then, the official recall notice is posted below with information for how owners can contact Nissan.

Infiniti boss De Nysschen confirms next-gen Q60 Coupe, ponders high-performance variants

We've known since mid-December that Infiniti's new global model naming convention would turn the current-generation G37 Coupe into the Q60 Coupe starting next year, but we haven't been clear on whether the model-range-formerly-known-as-G would get a successor, especially as its volume has traditionally been a lot lower than its sedan counterpart.
Thankfully, Infiniti president Johann De Nysschen (above) has stepped up to confirm that the newly revealed Q50 sedan will receive a two-door counterpart, though perhaps not as quickly as some would like. According to an interview with Australia's CarAdvice.com, De Nysschen says "the coupe we can probably expect two-and-a-half to three years down the road." That news also suggests that if there's an eventual convertible version, that it's a long way off, too. Why so long? Infiniti has "a lot of priorities" - priorities that undoubtedly include an already-confirmed front-wheel-drive small hatchback/crossover.
The report also indicates that Infiniti has some aspirations for stretching its new Q50/Q60 range in a higher-performance direction to take on competitors like BMW and Audi, the latter being De Nysschen's former employer. There's far from a firm timetable offered, of course, with De Nysschen saying "someday in the future we will be able to offer more high performance versions [of Q50] than we have today... the dynamic capabilities of this platform are very significant. It can handle far higher power than the engines we are using at launch."

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.