Find or Sell Used Cars, Trucks, and SUVs in USA

1956 Cj-5 Willys Jeep Jp Magazine Project Vehicle (ground Up) on 2040-cars

US $12,000.00
Year:1956 Mileage:21086
Location:

Peoria, Arizona, United States

Peoria, Arizona, United States

 This is a project vehicle built within the pages of Jp Magazine. Google Project Ground Up. *The Warn 8274-50 winch pictured on the cover and two Jp Magazine images is no longer on the vehicle. I can order you one if you have to have one. They cost me about $2,000 and I will add that to the price.* The Jeep is titled (with a clear title) in Arizona as a '56 CJ-5 but has the heart of a '98 Jeep Cherokee SE. The frame was built out of 2x4x3/16ths and 2x4x1/8th wall rectangular tube. The engine is a 2.5L multiport 4-cyl (from a '98 Cherokee)with an AX-5 manual transmission and NP231 transfercase with 4:1 TeraFlex Gears and a JB conversions Super Short SYE. Shifting of the T-case is handled by a Novak 231 shifter that offers easy positive shifting. The axles are a front high-pinion Dana 30 and a Chrysler Corporate 29-spline 8.25. Both are factory geared at 4.10 with stock Jeep axles. I also used the Cherokee master cylinder which has a booster to activate the front disc brakes and rear drums. The front axle currently has a Lock-Right locker (easy to remove) and the rear diff is open (although I have a Power lock for it). Suspension is based around custom Deaver springs based on YJ leafs with front shackle reversal and Fox shocks. It flexes well and rides pretty good at speed in washes and bumps (for a leaf sprung solid axle vehicle). The rollcage is built of 1 3/4 0.120 wall DOM. with 1-inch.095 wall tubing for the seat brackets. The A- and B- pillars of the rollcage are tied into the frame with the A-pillar tying into the rocker guards.  The rocker guards are also built from 1 3/4 .120 wall DOM. The gas tank skid plate is made from 3/16ths plate steel and the center T-case skid is made from 3/16ths steel plate and 1 3/4 0.120 wall DOM. The seats, full soft doors, soft half doors, full soft top, and bikini top are all from Bestop. The full top has two places that need to be repaired. This could easily be handled by any number of upholstery shops.  I also have a matching rear seat and seatbelts that can be installed (there is currently a Rubicon rack that is designed to hold an Engel fridge and secure the spare tire). The wiring/computer/fuse blocks of the Jeep is a paired down wiring harness from a '98 Jeep Cherokee. Radiator is a auto parts replacement radiator for a Jeep TJ wrangler (that came from the factory with this same engine/trans/T-case). Cooling is done by a Flex-a-light electric fan. The Jeep has a retro heater from Summit Racing. The exhaust is custom using stainless Magnaflow parts. The Jeep has power steering using the Saginaw box from the '98 Cherokee. The fuel tank is for an eary Jeep YJ. The tires are 33x10/50R15 BFGoodrich KM2 mud terrain tires on 15x7 Wheel Vintiques wheels. The air intake system is from AIRAID. The front driveshaft is from Tom Wood's Custom Drive Shafts. The 2.5L engine is from a '98 Cherokee as said. I just, last week, installed a new timing chain, water pump, thermostat, and thermostat housing and performed an oil change. The clutch feels good and the transmission shifts without grinding. Once the Jeep was completed (a year and a half ago) I drove it from Phoenix to the Rubicon trail, over the trail,  and back with virtually no drama or problems. I got an estimated best of about 20 miles per gallon which is great for a Jeep. The Jeep was also at Easter Jeep Safari in Moab and all over Arizona. Its reliable and capable. Would be perfect to tow behind a motor home or keep at a cabin near some offroad trails. The odometer does not work, but reads 21086.2 right now. The title says 38,000. The frame has 5,000-7,000 miles on it. The engine.trans/T-case/axles have unknown mileage, but they can last to 300,000 miles and are easy to repair, upgrade and maintain. Its a Jeep. There are probably more details on the build, but this is what comes to mind right now. Please ask questions if you are a serious buyer. No warranty is implied, but I can give advice on repairs or upgrades for years to come. The only "bad" about this Jeep is it has been used, and I was a bit rushed getting the wiring harness into the body and someone with a little knowledge of automotive wiring could clean it up. I could maybe do this, but I am selling the Jeep because I dont have much time to play with it and I need to move on to other projects. The Jeep is missing two of the chrome dog dish hub caps. I'll order them and replace them. *The Warn 8274-50 winch pictured on the cover and two Jp Magazine images is no longer on the vehicle. I can order you one if you have to have one. They cost me about $2,000 and I will add that to the price.* I also reserve the right to cancel this auction any time if the Jeep sells locally. Thanks.

Auto Services in Arizona

Windshield Replacement Phoenix ★★★★★

Auto Repair & Service, Windshield Repair
Address: 3001 N Randolph Rd, Glendale
Phone: (602) 792-5954

Valley Express Auto Repair ★★★★★

Auto Repair & Service, Automobile Air Conditioning Equipment-Service & Repair, Automotive Tune Up Service
Address: 629 W Broadway Rd, Paradise-Valley
Phone: (480) 630-1279

Tj`s Speedometer Repair ★★★★★

Automobile Parts & Supplies, Speedometers
Address: 2100 N. Stone Avenue, Oro-Valley
Phone: (520) 304-0242

Super Discount Transmissions ★★★★★

Auto Repair & Service, Auto Transmission
Address: 2330 W Glendale Ave, Phoenix
Phone: (602) 995-7443

Sun Devil Auto ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Body Parts
Address: 8919 E San Victor Dr, Paradise-Valley
Phone: (480) 860-8494

Storm Auto Glass ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 800 W Route 66 Ste 6, Bellemont
Phone: (928) 814-9391

Auto blog

2014 Jeep Cherokee uncovered with bold new look

Fri, 22 Feb 2013

Jeep has been shuttling around Alfa Romeo-based test mules and camouflaged prototypes of its replacement for the current Liberty for some time now. Those heavily disguised vehicles may have offered a glimpse of the new Jeep, but a new set of production-line images from Jalopnik tell a much more complete story.
Jalopnik report indicates unequivocally that the Cherokee name will be re-upped in place of Liberty, though it doesn't spell out exactly where that thinking comes from, though a name change has been rumored for some time. Chances are good that the same source that delivered these factory images delivered the name, as well.
The Cherokee absolutely has some Alfa Romeo DNA in its makeup, the final product is far from looking like its Guilietta ancestor. The athletic, high-waisted design is relatively attractive from what we can see here, though the grille and headlight treatment are sure to cause a lot of ruckus when the Cherokee makes its official debut at the New York Auto Show in April. The very narrow, pointed headlamps are pinched in a not particularly Jeep-ish fashion, and the curved, short version of the seven-slot grille is far more rakish than anything that Jeep has produced to date.

Jeep teases pair of Moab concepts early

Tue, 19 Mar 2013

With the 47th annual Moab Easter Jeep Safari coming up at the end of this month, Jeep is preparing to roll out six new off-road-ready concept vehicles. The first two being teased are the Jeep Grand Cherokee "Trailhawk II" concept and the Jeep Wrangler "Slim," and while we have no information on either, we at least get an idea of what they'll look like.
We can't tell why this Wrangler is called Slim, but it has a nice black-and-red paint scheme with a serious off-roading front bumper and five-spoke beadlock wheels. There's even less we can figure out about the Grand Cherokee's Trailhawk II concept except that it appears to be painted up in the same Crusher Orange paint job as the recently introduced SRT Viper TA. We'll likely more of these as well as peeks at the other Moab concepts as we get closet to this year's Moab Easter Jeep Safari, which will be held March 23 through 31.

Jeep brings quartet of concepts to Beijing to show its Chinese style

Mon, 21 Apr 2014

Jeep is making a big play for the Chinese crossover market at the 2014 Beijing Motor Show. It has a quartet styling concepts for the Renegade, Cherokee and Wrangler that are inspired by Chinese culture at the show.
Among them is the newest member of the Jeep lineup - the Renegade. Its Zi You Xia concept (pictured above) comes from the Mandarin for "rebel," and it's painted in Warm Chocolate Gray with Dark Anodized Bronze trim, including the 20-inch wheels. The roof, grille surround, and mirror caps are done in a complimentary Dark Charcoal color as an accent. The interior is a mix of dark brown leather and Anodized Copper trim. This is one swanky compact crossover.
The Cherokee Sageland and Urbane concepts are meant to show to different sides of Chinese style. With inspiration from the Shangri-La Region, the Sageland has Ivory Pearl tri-coat paint with bronze trim on the outside, and the interior is covered in Gray Nappa leather with red and blue stitching. The Urbane's look comes from the nightlife in the country's cities. The exterior is a color called Maximum Steel with Hyper Black trim. Inside, it combines Piano Black trim with dark red leather seats.