1969 Jeep Cj5 on 2040-cars

Auto blog

Updated 2014 Jeep Grand Cherokee ace same controversial moose test it failed in 2012 [w/video]

Some background: one of the more scandalous international incidents of he-said/he-said from 2012 was when Swedish magazine Teknikens Varld put the Jeep Grand Cherokee through its "moose (or elk) test" and reported that the SUV nearly rolled over. That lead to a whole lot of accusations and rebuttals: more than one website and Chrysler's own blog reported that the Jeep was overloaded; Chrysler said Teknikens printed the magazine then let Chrysler respond, Teknikens answered all of the charges in a lengthy post and said Chrysler was given a chance to comment before it went to print; when Chrysler sent investigators to oversee the test and the Jeep didn't go up on two wheels as it did in the first test, furthermore all four wheels stayed on the ground when Auto Motor und Sport tested a Grand Cherokee in the same way.
Teknikens then re-ran the test with a new vehicle and said it's been doing this test since the 1970s, uses the loading information that Chrysler provides to the Swedish motor authority and the previous Grand Cherokee passed with no problem. In the second test, the Jeep failed again, then it gave Chrysler engineers access to the car's electronics and ran the test again. In that second round the Grand Cherokee didn't repeat the lurid two-wheel action, but in eleven runs it blew out front left tire seven times. Chrysler still objects to the results of all of those tests and maintains that vehicle was safe.
The 2014 Grand Cherokee was given its shot at the gauntlet in the latest round of moose tests, and Teknikens Varld reports that it passed without any problem at all, its stability control working perfectly, controlling motion at low speeds and all the way up to 44.1 miles per hour. You can watch the video of the new test and read the press release from the magazine on the updated Grand Cherokee below.

Chrysler recalls 350k vehicles over ignition switches

Chrysler has announced a recall covering 349,442 vehicles due to ignition switches that can either become stuck or move without warning. All of the affected vehicles are from the 2008 model year, and were built before May 12, 2008.
The automaker has learned that ignition keys on some vehicles "may not fully return to the 'ON' position after rotation to the 'START' position during engine-startup," the company said in a statement. Additionally, "an ignition key may not fully return to the 'ON' position after rotation to the 'START' position and may inadvertently move through the 'ON' position to 'ACCESSORY' or 'OFF.'"
Chrysler says it is unaware of any related injuries, and notes that while reduced braking, engine or steering power is possible in such instances, the airbags are not affected. The later stands in contrast to General Motors' recent rash of high-profile recalls, and it's an important distinction that Chrysler (understandably) felt necessary to call out in bold print in its press release.

Chrysler recalls 2013 Ram pickups, 2014 Jeep Grand Cherokee

Chrysler's spate of successful products is about to be marred by a trio of recalls. The Pentastar is recalling 51,477 Ram trucks and Jeep SUVs. According to the National Highway Traffic Safety Administration, there have been no reported accidents, injuries or deaths related to the affected vehicles.
The largest action covers the Ram 1500, which is seeing 45,961 trucks being recalled. Models built between June 26, 2012 and February 5, 2013 are being recalled due to a potential software issue in the electronic stability control. Apparently, the system can be randomly deactivated upon vehicle startup.
Chrysler is also recalling 4,458 2014 Jeep Grand Cherokee models. Covering everything but the SRT models, the potentially defective SUVs were built between January 14 and March 20, 2013. This recall focuses on "premium headlights," which means cars equipped with LED running lights. During the switch from the bright daytime running lamp setting to the low-intensity parking light setting, an electrical spike can cause one of the Jeep's computers to go into a safe mode, turning off the LEDs. This violates Federal Motor Vehicle Safety Standards.