1974 Jeep Cj5 on 2040-cars

Auto blog

Jeep gives a trio of customs an encore showing at SEMA

While Jeep certainly had some new customs on display at this year's SEMA show, it wasn't afraid to recycle a few that people might have missed from earlier this year. The maker of many beloved off-roaders already displayed the Jeep Cherokee Dakar, Maximum Performance Wrangler and Wrangler Mojo at the 2014 Easter Safari, but they all made it to SEMA for an encore.
Based around the Trailhawk, the Cherokee Dakar (pictured above) imagines an even more off-road-capable version of the crossover. The concept wears a mix of Silver Steel Stain paint with Flame Red graphics and rides on 17-inch wheels wrapped in 33-inch BFGoodrich Mud Terrain tires. To back up the rugged look, the Dakar is fitted with rock rails and skid plates protecting the oil pan, front suspension, fuel tank and other underbody parts. It also sports prototype parts from Jeep Performance Parts, including a lift kit and fender flares.
The Wrangler is one of the paragons of off-roading, and as the name suggests, the Maximum Performance Wrangler concept is meant to be the ultimate example of what it can do. The custom features locking Dana 60 axles front and rear, a 4:1 Rock-Trac transfer case, prototype 4-inch lift kit and 37-inch Mud Terrain tires over beadlock wheels. To stay on the trails well into the night, a bar of LEDs is mounted above the windshield. And finally, the Mopar Blue exterior kind of makes the vehicle look like the world's toughest blueberry.

Jeep reveals annual Moab Easter Jeep Safari concepts

Jeep has unveiled its annual spate of concepts before the Easter Jeep Safari. Those start with the Grand Cherokee Trailhawk Concept (below left), complete with the company's EcoDiesel V6 engine. Designers threw in a set of 35-inch Mickey Thompson tires wrapped around 17-inch Rubicon wheels, and a set of custom fender flares help keep all that rubber under wraps.
Meanwhile, the Wrangler Mopar Recon (below right) packs a 6.4-liter Hemi V8 good for 470 horsepower. All that grunt gets to the ground via a five-speed automatic transmission and a set of a Dana 60 axles frond and rear with 4.10 gears. The Recon also makes use of a 4.5-inch prototype long-arm kit and a set of prototype eight-lug bead lock wheels.
The Wrangler Stitch (below left) builds on the momentum of the Wrangler Pork Chop Concept. Engineers once again set out to strike as much weight as possible from the vehicle, and actually managed to trim the curb weight down to 3,000 pounds. That effort has given the machine the same power to weight ratio as the Grand Cherokee SRT8. Plenty of carbon fiber, door deletes and a chrome moly roll cage all help trim those pounds, and a set of DanyTrac Pro Rock 44 axles with 4.88 gears and ARB lockers front and rear let this machine scramble over whatever is in its path.

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.