Find or Sell Used Cars, Trucks, and SUVs in USA

Jeep Cj 5 Off Road 4 Wheel Rock Crawler on 2040-cars

US $10,000.00
Year:1973 Mileage:999999
Location:

Hopkinton, Massachusetts, United States

Hopkinton, Massachusetts, United States

1973 JEEP CJ5

This Jeep has been custom built for off roading.  I have listed the approximate values of most of the upgrades in this jeep not taking into account labor and design.  The winch pictured is not included in this auction.  This Jeep doesn't just have big tires and a lift.  It has been correctly engineered to perform in all off road conditions.  I would really like for this to go to a true Jeep enthusiast.  Please understand this is an off road vehicle only.  I am available if you would like to see it in person.

DRIVETRAIN


ENGINE:  AMC 360 WITH EDELBROCK INTAKE ($500), HOLLEY PROJECTION FUEL INJECTION ($600), ARB SNORKLE ($400), DOUG THORLEY TRI-Y HEADERS ($400), AND DUAL FLOWMASTER EXHAUST ($700).

TRANSMISSION: T18 WITH 6.32 FIRST GEAR AND NEW CLUTCH ($700).

TRANSFER CASE: DANA 20 WITH TERRA LOW 3.15 LOW RANGE GEARS ($1000)

AXLES: DANA 44 REVERSE CUT/HIGH PINION WITH SELECTABLE OX LOCKER, 4.88 GEARS AND ALLOY AXLE SHAFTS ($8000)

TIRES: SUPERSWAMPER BOGGER 37X13X15 ($1700)

SUSPENSION

FRONT: BDS 4" LEAFS, CONFER SHACKLES, CUSTOM SPRING OVER AXLE, HIGH SHOCK TOWERS, AND LONG TRAVEL SKYJACKER SHOCKS ($600)

REAR: CUSTOM 3/4 ELLIPTICAL SUSPENSION COMPRISED OF 4" BDS SPRINGS MOUNTED SPRING OVER WITH A FABRICATED ANIT-WRAP BAR THAT ELIMINATES AXLES WRAP AND DOESN'T LIMIT THE INCREDIBLE ARTICULATION WHILE REMAINING STABLE IN OFF CAMBER SITUATIONS ($600)

STEERING

1 TON CHEVY KNUCKLES WITH PARTS MIKE HIGH CLEARANCE SUPER ARMS, CROSSOVER TIE ROD AND DRAG LINK WITH LARGE STYLE GM ROD ENDS ATTACHED TO A PSC POWER STEERING BOX WITH BRACE. ($2000)

BRAKES

GENERAL: WRANGLER POWER MASTER CYLINDER WITH BOOSTER ($300)

FRONT: 6 BOLT CALIPER PLATE WITH HEAVY DUTY 1 1/8" ROTORS ($500)

REAR: FORD EXPLORER REAR DISK WITH E BRAKE CAPABILITY ($500)

BODY

BODY: FIBERGLASS TUB AND FENDERS WITH REINFORCED TAILGATE OPENING. 3/16" SOLID ROCKER GUARDS WRAPPED COMPLETELY TO FRAME.  ORIGINAL STEEL TAILGATE, HOOD, AND GRILL. ($1500)

INTERIOR: FULL SUSPENSION RACING SEATS, LARGE WATERPROOF CENTER CONSOLE ($600)

ROLL CAGE: CUSTOM BUILT 3 HOOP TIED TO FRAME AT 6 POINTS WITH SEATS TIED IN ($1500)

BUMPER: 6061 3/4" THICK ALUMINUM CUSTOM FRONT WINCH BUMPER WITH INTEGRATED HAWSE FAIRLEAD ($900)

 










Auto Services in Massachusetts

Wilson S Service Center ★★★★★

Auto Repair & Service
Address: 455 Main St, Carlisle
Phone: (978) 448-0333

Wentworth Service Station ★★★★★

Auto Repair & Service, Gas Stations
Address: 50 Stedman St, Lexington
Phone: (617) 524-3713

Urban Auto Body ★★★★★

Auto Repair & Service, Dent Removal
Address: 92 Harbor St, Revere
Phone: (781) 593-9203

T Tires ★★★★★

Auto Repair & Service, Automobile Parts, Supplies & Accessories-Wholesale & Manufacturers, Tires-Wholesale & Manufacturers
Address: 142 Canal St., Wenham
Phone: (978) 219-3905

Riverside Imports ★★★★★

Auto Repair & Service
Address: 1095 Main St, Charlton-Depot
Phone: (508) 795-1771

Ralph`s Auto Center ★★★★★

New Car Dealers, Used Car Dealers
Address: 867 Church St, West-Wareham
Phone: (508) 998-1141

Auto blog

Chrysler defies NHTSA, says it won't recall 2.7M Jeep Grand Cherokee, Liberty models

Wed, 05 Jun 2013

Facing a possible recall totaling around 2.7 million of its most popular SUVs, Chrysler remains insistent that the 1993-2004 Jeep Grand Cherokee and 2002-2007 Jeep Liberty are safe vehicles. This comes on the heels of a recall request from the National Highway Traffic Safety Administration for these two models due to fuel tanks mounted behind the rear axle, which could possibly be ruptured during severe rear-end collisions, leading to an increased risk of fire. In response to the allegations, Chrysler says that it does not agree with NHTSA nor does it plan on recalling either vehicle.
Chrysler said both SUVs "met and exceeded" the requirements for fuel-system integrity, and cooperated fully with NHTSA since the investigation was opened in 2010. While 15 deaths and 46 injuries have been reported from fires caused by rear-end collisions on these models, Chrysler is claiming that the vast majority of incidents cited by NHTSA were "high-energy crashes," including one where a stopped Grand Cherokee was rear-ended by a tractor trailer going 65 miles per hour.
The automaker wraps up by saying "NHTSA seems to be holding Chrysler Group to a new standard for fuel tank integrity that does not exist now and did not exist when the Jeep vehicles were manufactured." Scroll down for Chrysler's official response to NHTSA, but we're pretty sure this isn't the last we've heard on this issue.

Fiesta-sized Jeep coming in 2014

Wed, 03 Jul 2013

We've heard rumors before about a new, baby Jeep to slot below the new-for-2014 Cherokee (pictured) in the automaker's lineup. Now, Edmunds is reporting that the new crossover will arrive sometime in 2014, and will be about the same size as the Ford Fiesta. This currently unnamed vehicle will effectively replace both the Compass and Patriot in the Jeep lineup.
Speaking to Edmunds, Jeep CEO Mike Manley said that the new, small Jeep will be assembled in Italy and marketed globally beginning sometime next year. Manley did not provide many details on the new model, but did say that it will be 4.2-meters (165 inches) long. The Cherokee, by comparison, is 4.6-meters long (181 inches). Furthermore, Edmunds reports that while the new small Jeep will offer diesel power in other markets, there are no plans for an oil-burning version here in the US.
Many other automakers are exploring this smaller crossover segment here in the US. General Motors recently launched the Buick Encore, which is loosely based on the Chevrolet Sonic subcompact's platform. Ford has already launched its Fiesta-based EcoSport in other markets, and has reportedly been pondering the idea of offering it in the US, as well.

Jeep Wrangler's shift to aluminum could see production leave Toledo

Mon, 06 Oct 2014

The Jeep Wrangler may be a timeless design, but sooner or later, time will run out and Chrysler will have to replace it with a newer model more friendly towards the earth it's designed to traverse. That will, it seems, mean a shift to aluminum construction (whether just for the body or for the entire structure) - but what will that mean for the Wrangler's long-time home of Toledo, OH?
According to the latest pronouncements from Fiat Chrysler chief Sergio Marchionne, the shift to an aluminum Wrangler would likely mean moving production out of Toledo. "If the solution is aluminum," Marchionne told Automotive News, "then I think unfortunately Toledo is the wrong place, the wrong setup to try and build a Wrangler, because it requires a complete reconfiguring of the assets that would be cost-prohibitive."
Marchionne also indicated that, were Wrangler production to move elsewhere, it would find another line to take its place in Ohio. "One of the thing that we are dealing with now is what else we do with Toledo that fulfills our commitment to the city and to Ohio. I don't have a doubt that there will be zero impact on head count and employment levels and anything else." Jeep has built the Wrangler in Toledo since World War II, with the exception of six years starting in 1986 when it was built in Brampton, Ontario. The complex dates back to 1910 and currently produces the Wrangler and Cherokee. Past products have included the Wagoneer and Commanche as well as the Dodge Dakota and Nitro.