2000 Jeep Cherokee Sport Sport Utility 4-door 4.0l on 2040-cars

Auto blog

NHTSA investigating why Jeep recall fix is taking so long

Jeep's saga with the National Traffic Safety Administration and the voluntary campaign to repair 1.56 million vehicles for allegedly unsafe trailer hitches, is getting yet another chapter. The controversy appeared to finally be over in January when the automaker found a supplier for the replacement parts. Nothing is ever that easy, though, and the government regulator is now requesting documents from the company to clarify why the repairs are taking so long to begin.
Jeep parent company Chrysler has until July 16 to submit documents and answers to NHTSA explaining the situation. The regulator claims that despite its compromise to inspect and repair the models with improper hitches in June 2013, Chrysler didn't find a part supplier until December and didn't order the replacements until January. The government agency believes that the first components weren't manufactured until May of this year and vehicles may not actually be repaired until as late as August. According to the report, if the Chrysler doesn't supply what NHTSA is asking for, the agency could "take additional appropriate action as warranted."
Throughout this entire process, Chrysler has asserted that the vehicles met the applicable crash test standards of the time, and it has kept NHTSA abreast of the repair activity. In a recently released statement it said that the regulator analyzed eight rear impact reconstruction tests and found the replacement hitch to be safe. To keep up with the high demand for replacements, Chrysler is working with multiple suppliers, and they are running three shifts, six days a week to get the parts ready as soon as possible.

Jeep gives a trio of customs an encore showing at SEMA

While Jeep certainly had some new customs on display at this year's SEMA show, it wasn't afraid to recycle a few that people might have missed from earlier this year. The maker of many beloved off-roaders already displayed the Jeep Cherokee Dakar, Maximum Performance Wrangler and Wrangler Mojo at the 2014 Easter Safari, but they all made it to SEMA for an encore.
Based around the Trailhawk, the Cherokee Dakar (pictured above) imagines an even more off-road-capable version of the crossover. The concept wears a mix of Silver Steel Stain paint with Flame Red graphics and rides on 17-inch wheels wrapped in 33-inch BFGoodrich Mud Terrain tires. To back up the rugged look, the Dakar is fitted with rock rails and skid plates protecting the oil pan, front suspension, fuel tank and other underbody parts. It also sports prototype parts from Jeep Performance Parts, including a lift kit and fender flares.
The Wrangler is one of the paragons of off-roading, and as the name suggests, the Maximum Performance Wrangler concept is meant to be the ultimate example of what it can do. The custom features locking Dana 60 axles front and rear, a 4:1 Rock-Trac transfer case, prototype 4-inch lift kit and 37-inch Mud Terrain tires over beadlock wheels. To stay on the trails well into the night, a bar of LEDs is mounted above the windshield. And finally, the Mopar Blue exterior kind of makes the vehicle look like the world's toughest blueberry.

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.