2010 Jeep Commander Limited on 2040-cars

Auto blog

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.

Jeep Wrangler's shift to aluminum could see production leave Toledo

The Jeep Wrangler may be a timeless design, but sooner or later, time will run out and Chrysler will have to replace it with a newer model more friendly towards the earth it's designed to traverse. That will, it seems, mean a shift to aluminum construction (whether just for the body or for the entire structure) - but what will that mean for the Wrangler's long-time home of Toledo, OH?
According to the latest pronouncements from Fiat Chrysler chief Sergio Marchionne, the shift to an aluminum Wrangler would likely mean moving production out of Toledo. "If the solution is aluminum," Marchionne told Automotive News, "then I think unfortunately Toledo is the wrong place, the wrong setup to try and build a Wrangler, because it requires a complete reconfiguring of the assets that would be cost-prohibitive."
Marchionne also indicated that, were Wrangler production to move elsewhere, it would find another line to take its place in Ohio. "One of the thing that we are dealing with now is what else we do with Toledo that fulfills our commitment to the city and to Ohio. I don't have a doubt that there will be zero impact on head count and employment levels and anything else." Jeep has built the Wrangler in Toledo since World War II, with the exception of six years starting in 1986 when it was built in Brampton, Ontario. The complex dates back to 1910 and currently produces the Wrangler and Cherokee. Past products have included the Wagoneer and Commanche as well as the Dodge Dakota and Nitro.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.