2009 Lexus Gx470..navigation..mark Levinson Audio Pkg..tow Hitch Bracket on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Production Lexus NX leaked in Jim Lentz presentation?

Before kicking off the Detroit Auto Show, the Society of Automotive Analysts had Toyota CEO Jim Lentz come on stage to say some words about the future of the auto industry, as well as what's coming for Toyota. While this type of information would normally stay off our radar, a video of his speech likely gives us our first look - albeit low-res - at the production version of the Lexus NX compact crossover.
In the video recorded by AmericaJR, Lentz refers to the turbocharged LF-NX Concept that was on display at the Tokyo Motor Show, but comparing this image to our gallery from Tokyo, there are clear differences between the two vehicles. These include the toned-down shape of the spindle grille, lower fascia crease and door mirrors as well as a headlight design that more closely resembles that of the 2014 IS sedan and the newly introduced RC coupe. From what we can see of the rest of this image, the NX should retain some of the LF-NX's angular side body creases. The vehicle you see above basically looks ready for production.
If this is in fact the NX, then reports of a Geneva debut for the luxury crossover seem even more accurate. The entire video is posted below, but the NX comes on screen around the 10:40 mark.

Lexus NX small CUV caught

To the untrained eye, these photos might not look like anything more than a Lexus CT 200h undergoing testing, but what we really have here is something pretty significant. According to our spies, this is actually a mule that gives us our first glimpse at the upcoming Lexus NX crossover, a smaller vehicle that will slot below the RX in the automaker's CUV portfolio - presently only one vehicle.
Look closely, and you'll note that this mule has a much higher ride height than the normal CT hybrid hatchback. The upgraded wheels with crossover-spec tires are another dead giveaway that something more robust is being tested in this CT's shell.
Late last year, we learned that Lexus had reportedly trademarked the names "NX 200t" and "NX 300h," which provided a glimpse into the powertrain offerings for the new CUV. Lexus will finally make use of turbocharged power with this new NX - a 2.0-liter turbo-four fitting of the 200t nomenclature. A hybrid variant will almost certainly be available - the 300h - probably using the same 2.5-liter four-cylinder engine and electric motor combination found in the ES 300h. Our spies report that a naturally aspirated, four-cylider version should also be available.