Mazda Speed3 83,000 Miles, 6 Speed Manual Transmission, Excellent Condition on 2040-cars

Auto blog

Toyota, Honda, Mazda and Nissan recall 3.4 million vehicles for faulty airbags

Most vehicle recalls that take place these days are a result of some problem that happens during the manufacturing process by the automaker, but as we see here, parts suppliers can also factor in to problematic safety issues. Automotive News is reporting that a total of 3.4 million vehicles produced by Japanese automakers between 2000 and 2004 are being recalled globally due to faulty airbags produced by an outside supplier, Takata Corp.
According to the report, vehicles from Toyota, Honda, Nissan and Mazda are being recalled because of passenger front airbags that do not inflate properly. Globally, Toyota is said to be recalling around 1.73 million cars including 510,000 in the US composed of Toyota Corolla, Matrix, Sequoia and Tundra as well as the Lexus SC430 for the 2001 through 2003 model years; this is the second time this year the 2003 Corolla and Matrix have been recalled for an airbag problem. Honda is recalling 1.14 million models, Nissan another 480,000 and Mazda 45,463. The article says that Takata supplied faulty airbags to non-Japanese automakers, but it did not specify which ones.
Honda and Toyota have released information on their own websites about the recall, while Nissan and Mazda have not yet commented. Read official press releases from Honda and Toyota, below, and look for updates as we have word from the others.

Mazda's new Mexican plant capacity rises to 230,000

After the turmoil of last year, 2013 is getting off to a much better start for Mazda. The company has issued a release indicating that the forthcoming plant in Salamanca, Mexico has had its production capacity raised even though it isn't scheduled to go online until March 2014. The original plans called for a 140,000-unit capacity, 90,000 of that allotted for the Mazda2 and Mazda3, the remaining 50,000 for a small car Mazda would build for Toyota that would be based on the Mazda2. The new plans call for raising that by 90,000 units to a total of 230,000 units within two years, by the end of March 2016, and it looks like it will all go toward Mazda production to satisfy growing demand for Skyactiv vehciles. The Mexican plant's opening will be the return of Mazda manufacturing to North America, after Mazda6 production was moved back to Japan last year.
More good news for the company is that it projects 10 billion yen ($114 million) in net income for the financial year that will end in March. That would be a welcome turnaround from the 100-billion-yen loss in the previous financial year, part of a series of three annual losses in a four-year span.
You'll find the press release with the factory update below.

Bauer Catfish is a Miata-based trackstar in the making [w/videos]

We're not trying to make a joke here. The creation you see above really is called the Bauer Catfish, and while the name is about as attractive as your average bottom feeder, the car itself is built on a sexy notion. Take the mechanical bits of one 1990-2005 Mazda MX-5 Miata, add in a tube chassis for as little weight as possible, complete with some custom body work and go forth. Bauer says the finished product weighs in at just 1,550 pounds, and the company will be happy to pull the stock four-cylinder to drop in a healthy General Motors LS V8.
The pre-production prototype shown above competed in last year's 25 Hours of Thunderhill, finished the race and earned a spot on the podium in the "anything goes for sports racers" ESR class. Very cool.
If you're looking for a dedicated track car, it may not get any better than this for the money. Expect to pay around $13,900 depending on options, plus the cost of your donor Miata. That's a good sight cheaper than a used Chevy Corvette Z06 and likely to be quite a bit more fun. After you're done watching it in action in the brief videos below, check it out over at Bauer Ltd.