1970 Gto 455 Ho Ram Air, Very Rare Original,#s Matching, With Phs Documentation on 2040-cars
Streamwood, Illinois, United States
Body Type:HARDTOP
Engine:455 HO RAM AIR
Vehicle Title:Clear
For Sale By:Private Seller
Interior Color: Black
Make: Pontiac
Number of Cylinders: 8
Model: GTO
Trim: 2 DOOR
Drive Type: RWD
Mileage: 60,000
Warranty: Vehicle does NOT have an existing warranty
Exterior Color: Red
Hi all. Up for auction we have my very rare and very real 1970 455 HO Ram air GTO with it's original 4 bolt main engine, auto trans, and 12 bolt posi. The car runs well and moves but needs brake work and some other items to be driven. It has a 350 engine in it now with the original trans and 12 bolt posi in it also. It goes into forward and reverse very smoothly with no clunks in the trans or rear end but I have not driven it over 5 mph so I don't know if the trans has 2nd or 3rd gear. I am sure it will need a flush and a modulator at least. The posi seems smooth and with a half throttle punch left a nice smooth both wheel 10 foot patch. The 455 is on a stand at 30 over and should be ready for a rebuild with a finish hone, decking, and cleaning.
THE ENGINE CODES are YC block code with the car vin # on the front bottom of the block. 9799140- rear engine part #, 9799068 intake, #64 heads, rare distributor # 1112012. It also comes with her original crank, pistons, rods, windage tray, oil pan, etc. I don't have the original carb or exhaust manifolds. The 1972 350 engine in the car has the correct long bolt 455 motor mounts and new 455 ho fuel pump.
THE TRANS CODE is 1970 PR and has the original bolts on the crossmember that look to have never been removed. The PR code is original to 1970 455 HO cars only.
THE REAR END code is XT which is 1970 12 bolt with 307 ratio and also 455 HO only. It is still bolted in with it's original ride and handling package shocks which are bad, of course, but can be rebuilt to keep the #s correct. I removed one of the front shocks and found the late1969 production date on it, so it's included but not on the car now.
THE BODY.. First of all the frame is very solid with only surface rust and will need very little if any repair. The only weird thing on it is a tow hitch that was welded in the rear at both frame rails and bolted to the bumper. I unbolted the hitch and saved it but the frame bracket is still on the car. I removed part of the trunk floor, which is the rustiest spot on the car, and cleaned the spot on top of the frame rail to see the cars vin # which matches also. You can see how minor the surface rust on the frame is in the photo of it . I have 2 valances in bad shape but a nice set of turn signals comes with. The nose is straight but has cracks and a few small chunks missing. The core support is bent a little so it would need work or to be replaced. The hood is an original ram air hood with the cut outs in the bracing for the ram air pan. It is in very good shape with no kinks on the edge and no rust holes but has a few dings. I also have a correct set of ram air scoops with the mounting tabs for the flapper assembly. The only other ram air parts with the car is the pull knob and bracket. The fenders are usable and fairly straight with solid mounting tabs but have the normal rust in the lower rear sections. The drivers door is nice and not very rusty. It will need very little body work. The passenger door will need a little more work. It's somewhat straight on the bottom but has some bubbling on the skin and a few dings and holes. On the drivers door jam, that's in good shape, you can see the original paint. On the passenger side jam it needs some rust repair. The top has a few spots that need work, it's a cordova top car so it has some pitting and a few small holes under the stainless around the windows. All the mounting tabs are still there but the stainless is just on the car loosely with a few clips. Most of the stainless is good but the chrome for the top is pitted. The drivers quarter is pretty straight and will just need a lower patch and a few dings fixed. The inner and outer are good with only minor rust holes. The passenger quarter as well as the rocker and outer well will need to be replaced. The trunk lid is off a LeMans and will need the holes for the emblem welded and maybe a patch on the lower outside edge where it's bubbling. The inner lip is ok. The floors are ok under the rear seat and up towards the trunk area but have the normal holes under your feet. Again, not to bad but will need a few patch panels. The trunk is shot but will be fine with a full trunk pan kit and drop offs to the quarters.
INTERIOR... It's mostly complete and looks ok but will need just about everything replaced to be mint. The headliner is out but I have the rods and the welting trim for it. The seats work but need foam and covers. The frames are solid. The dash has a cover that actually looks good and almost original but the gauges will need to be replaced or rebuilt. The steering wheel and column look good.
ELECTRICAL...If I was restoring this car I would replace the engine and headlight harness. Both of them are off a 70 Lemans and have a few splices. I hooked up the grounds and one headlight so far and it works when you pull the switch out. The engine harness works but I think it needs a neutral safety switch. The car turns on and off with the key but I have a temporary switch under the dash for the starter now, wired with a fuse of course. Also the key has to be pushed in to turn. The key and lock are new but I think they were poor quality.
This car is a solid start for a restoration or with $500.00 or so could be a driver while you fix it up. Either way it's a very rare collector car with 21 options. I have shipped a few GTO's with spare engines by removing the passenger seat and setting the engine on a board in it's place. I have sold a few cars on ebay and everyone was always happy so Please ask any questions that you have.
I WILL ONLY SELL THIS CAR TO SOMEONE IN THE U.S. IT'S A RARE PART OF OUR HISTORY AND NEEDS TO STAY HERE. SHIPPING IS UP TO THE BUYER BUT I WILL HELP ANY WAY I CAN.
Pontiac GTO for Sale
1964 pontiac gto post coupe
1964 pontiac gto convertible 5 speed 389 3x2(US $25,000.00)
1968 gto convertible original a/c, car, hideaway, project car runs and drives(US $11,500.00)
1967 gto convertible project with driver 1967 lemans convertible donor red/whte(US $20,000.00)
1969 pontiac gto judge conv
1968 gto convertible 70,000 original miles
Auto Services in Illinois
Woodfield Nissan ★★★★★
West Side Tire and Alignment ★★★★★
U Pull It Auto Parts ★★★★★
Trailside Auto Repair ★★★★★
Tony`s Auto & Truck Repair ★★★★★
Tim`s Automotive ★★★★★
Auto blog
Airbag recall adds 85k Pontiac Vibes to tally
Fri, 13 Jun 2014The repairs needed for the faulty airbag inflators supplied by Takata continue to expand. Toyota initially announced a recall of 766,300 vehicles equipped with the bad part on June 11 as a followup to a campaign from 2013. Soon after, the National Highway Traffic Safety Administration opened a preliminary evaluation into five automakers who also used the component in their models. Now, NHTSA has released the official announcement of the latest Toyota recall listing 844,277 affected cars, including the newly added 2003-2004 Pontiac Vibe.
While NHTSA's document didn't include a model-by-model breakdown, General Motors spokesperson Alan Adler estimated to Autoblog that roughly 85,000 Vibes in the US would be covered under the latest recall. Like the rest of the affected models, the airbag inflator could rupture in a crash causing the bag not to work correctly, possibly spraying metal fragments at the occupant.
Toyota spokesperson Cindy Knight told Autoblog that the reason for the disparity between the earlier press release and NHTSA document was that Toyota was continuing to comb through VINs to create a list of affected vehicles. The original number was an estimate of that process at the time. Scroll down to the recall report from NHTSA.
NHTSA could add 1M cars to GM recall
Wed, 13 Mar 2013
The Detroit Free Press is reporting that the National Highway Traffic Safety Administration may expand a recall campaign for faulty brake lamps. The agency is currently looking into complaints that certain 2004-2011 Chevrolet Malibu models as well as some 2007-2009 Saturn Aura sedans may have brake lights that do not illuminate when the driver presses the pedal. Alternatively, the lamps may also illuminate without input from the driver. General Motors recalled 8,000 Pontiac G6 models from the 2005 model year for the same problem, and NHTSA is currently investigating whether to add 550,000 more G6 models built between 2005 and 2009 to the list for the same issue.
In addition, investigators are currently examining 97 complaints from Malibu and Aura owners with the same trouble. If NHTSA adds those models to the recall campaign, more than one million units could be covered. GM, meanwhile, says there have been no accidents or injuries as a result of the problem.
Lutz says Washington killed Pontiac, next G6 was to be ATS derivative
Tue, 29 Oct 2013How many people think Buick or GMC should have gotten the axe instead of Pontiac? You can't see it, but I'm raising my hand. Autoweek reports that former Vice Chairman of GM, Bob Lutz, has indicated that things didn't have to end up the way they did.
"The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.'"
In a talk given at the Petersen Automotive Museum for the Inside the MotoMan Studio series, Lutz says "The Feds said, 'Yeah, how much money have you made on Pontiac in the last 10 years?' and the answer was, 'Nothing.' So, it goes. And when the guy who is handing you the check for $53 billion says, 'I don't want Pontiac, drop Pontiac or you don't get the money,' it doesn't take you very long to make up your mind." Lutz even added that the next-generation Pontiac G6 would have benefitted from the rear-wheel-drive platform of the Cadillac ATS. How awesome would that have been?