1991 Porsche 911 964 C2 Cabriolet With Rebuilt Engine on 2040-cars

Auto blog

2014 Porsche 911 Turbo Cabriolet spotted testing in the nude

The Porsche 911 wouldn't be the Porsche 911 unless there were twenty-something different models to choose from (note: we are not complaining), and the latest one was just spied by our trusty photographers out on Germany's Nürburgring. Feast your eyes on the 911 Turbo Cabriolet - the droptop version of the new Turbo wonder that debuted in May - looking all sorts of stealth in its black-on-black-on-black prototype scheme.
Mechanically, the 911 Turbo Cab should be identical to the fixed-roof version, meaning a twin-turbo 3.8-liter flat-six engine will live in the car's rump, putting out something like 520 horsepower. Of course, there's also the hotter Turbo S version of the coupe, and we expect that to get the droptop treatment, as well, with 560 horsepower on tap. The added weight of the folding top and additional structural supports will likely make for slightly slower 0-60 times for both cars, though considering the base Turbo will hit 60 miles per hour in 3.2 seconds, "slower" is a very relative term indeed. All that force will run to the ground via all-wheel drive, managed by Porsche's seven-speed PDK dual-clutch transmission.
The wide stance of the 911 Turbo Coupe carries over to the Cabriolet, no doubt fitted with the same (standard) 20-inch wheels. Inside, the usual luxury amenities will be on hand, along with nearly endless customization options.

New Porsche 4-cyl engines to range from 1.6L to 2.5L

Recent rumors of a turbocharged, flat-four-engine from Porsche for the Boxster (pictured testing above), Cayman and maybe other models go back over a year. The latest scuttlebutt indicates that there could be three variants on the horizon with 1.6-, 2.0- and 2.5-liter displacements and power as high as 360 horsepower.
Car magazine in the UK claims to have access to the specifications for the project and thinks the 2.0- and 2.5-liter versions are guaranteed for production for the Boxster and Cayman. However, it believes a question mark still looms over the 210-hp 1.6L because the engine would go into a new, smaller sports car that still doesn't have a green light for production.
Regardless of displacement, the new fours would be turbocharged and direct-injected. The 2.0-liter would produce around 286 hp and 295 pound-feet of torque, and the 2.5-liter would make about 360 hp and 347 lb-ft. Earlier reports pegged some parts sharing with the current flat-six.

Production Porsche 918 Spyder images leak out of Chinese patent office

A few images of what looks to be the production Porsche 918 Spyder are here to say hello, courtesy of a patent office in China. If these provide an accurate look at what the hybrid supercar will look like, there are a few differences between it and the latest examples of the pre-production prototypes our spy shooters have seen.
The jerry-rigged turn signals inside the headlight enclosures and on the front fenders on the prototype are replaced with more polished units inside the headlamps located underneath the main beams. Behind that, the door handles have been swapped from horizontal latches on the door to vertical openings located just behind the door shutline.
We've also seen a Martini-liveried version of the 918 Spyder that has extra carbon elements that don't appear on this car. It was at the Nürburgring with carbon lips on the front fenders and another carbon element that hung from the rear fenders and ran down to the rear diffuser. When we saw the car on our Deep Dive piece, the front lips were gone but that rear piece remained, and we can't tell from the brochure and options sheet that we've seen so far what it comes with. The wheels from the concept and the green brake calipers, minus the polycarbonate covers, should be the standard fitment while the ten-spoke magnesium wheels will be a 29,750-euro (about $39,000 US) option.