2011 Ram 1500 2wd Quad Cab 140.5" Slt on 2040-cars

Auto blog

Ram bringing Rumble Bee Concept to Woodward

The 2013 Woodward Dream Cruise is taking place this weekend, and will see the arrival of over 1.5 million people and around 40,000 vehicles of seemingly every make in history. It's also a huge event for the manufacturers that call Detroit home, with Chevrolet setting up shop in Birmingham, Ford and its Mustang Alley locating itself in Ferndale and Chrysler hunkering down at 13 Mile in Royal Oak.
Ram will take advantage of the captive audience (if you think we're joking with the use of the term "captive," you've never tried to get off of Woodward during The Cruise) to show a new concept truck. And, judging from these teasers, it's going to be.. the Rumble Bee. In the past, Ram offered a Rumble Bee edition Ram 1500 that was mainly a styling treatment, but they were kinda cool trucks for those that wanted a muscle car but needed the room and utility of a big vehicle.
Details on the new Rumble Bee are scarce, but judging by the images seen here, it will sport bright yellow paint and a pair of large, black, five-spoke wheels wrapped in low-profile tires. The hood sports a set of hoodscoops for a bit more aggression, while the interior gets a reinterpreted dial shifter for the eight-speed automatic. We also see what may be a button to let a bit more rumble emanate from what we'd assume is a large Hemi engine underhood. Take a look at the gallery below to see both teaser images, and check back here for more as soon as we get it.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

2014 Promaster looks like a Fiat, hauls like a Ram

A new day is dawning, folks. The old-guard vans of our youth are being replaced with a new flock of European-inspired commercial vehicles from the likes of Ford, Nissan (Renault) and Mercedes-Benz. Here in Chicago, Ram pulled the covers off its entry into the reborn commercial van market with the 2014 Promaster, based on the well-known European Fiat Ducato.
Ram makes no bones about the Promaster's Fiat underpinnings, though the company claims it has beefed up the machine for US roads and uses with a re-engineered chassis, a more robust suspension setup, improved brakes (from Brembo), additional corrosion protection, improved climate control and additional safety systems.
Power comes from one of two powerplants options, one gas and one diesel. First up is Chrysler's well-known 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque mated to a six-speed automatic transmission. For a bit more pulling power and durability, Ram is offering a new 3.0-liter four-cylinder diesel engine pumping out 174 hp and, more importantly, 295 lb-ft of torque at just 1,400 rpm. That engine sends its torquey goodness through a six-speed electronically controlled automated manual gearbox.