Find or Sell Used Cars, Trucks, and SUVs in USA

1979 Fj40 Landcruiser, Original Paint And Drivetrain, Unrestored on 2040-cars

Year:1979 Mileage:102333
Location:

Sheridan, Wyoming, United States

Sheridan, Wyoming, United States

This is a 1979 FJ40 with only 102k original miles. It is an unrestored original that has never been painted. You can see exactly what you are getting. This is a great vehicle to begin a ground up restoration on. The frame and axles have minor surface rust and will clean up easily without any of the major pitting that is seen on some vehicles from salty enviroments. This Cruiser runs, steers, stops, and drives nice. I would not hesitate to drive this vehicle to any destination in the United States.

I first purchased this vehicle in 2001. At that time it had 80k miles. I owned it for several years and then sold it to a good friend of mine. It was sold a couple more times before I re-purchased it last year. I had intentions of completing my 4th complete frame up restoration but decided to stick with the one I already completed.

The tires were purchased new 3 months ago and have about 10 miles on them. They are mounted on original FJ40 rims and have brand new OEM hubcaps. They are 33x10.50R15 BF Goodrich Radial Mud Terrains. All 5 were purchased at the same time.

The radiator and water pump were recently replaced. It currently runs a Weber carburetor and header with a Mallory Unilite ignition. There is a new OEM carb, linkage, some side mirrors, and air cleaner included to take it back to stock. I also have a stock exhaust manifold from a 1977 2F motor that I will include if the buyer desires. The exhaust on the rig is not stock but is also new within the last couple of years.

I drove this rig today and it starts and runs perfect. It is a solid rig and is very complete. The only modifications from stock are the carb and header, Mallory electronic ignition, and rear fender flares.

I have tried to show the rust as clearly as possible in the pictures. The rear quarters have the typical rust. To fix this, it needs quarter panels and the rear sill parts that are all available from Cool Cruisers of Texas. There is some rust in the wheel wells but it is small and patches will do. There are also 2 small holes in the drivers side floor that need a patch. The rust on the rockers appears to be just deep surface rust and should clean up without having to replace any panels.The fenders and hood are good as well.

There are some other minor dents in the front passenger fender and passenger door.

If you have read this far, you already know that the 79-84 FJ40s are the ones that are highly sought after by collectors. They have the under body gas tank that is a little bigger and a lot safer than the in-cab tanks of the ealier years. They have the 4 speed transmissions and the 3:70 gear ratios that make them drive better at highway speeds. The 33 inch tires help this rig run comfortably down the road at 75.

This is a great rig and you will not be disappointed. I have heard and seen all the stories of people buying painted over rust buckets for big money and having to sink thousands into them to fix them. You can see exactly what you are getting with this rig.

I ask for a $500 deposit within 2 days of the close of this auction. The balance can be handled through a bank transfer cash in person. I have a clear Wyoming title for this vehicle in my hand. No bank liens or other issues.

This rig also comes with a Warn 8274 winch and remote that is in great working condition. There is also a heavy duty panel that closes the back end of the tub if you take the top and rear doors off. It is shown under the extra parts. The original tool bag with the Toyota OEM tools and some extra no-name tools, as well as all original jack and handles is there too. The brake master is also new. The rear seat is a Con-Fer unit that folds down and has storage underneath. There is also a Con-Fer console installed. I do not have the original console piece. Stereo is new too! 

 

 

 


On Apr-07-14 at 05:56:45 PDT, seller added the following information:

This rig has a Rancho 2 or 3 inch lift kit and it also has an Auburn limited slip differential in the front axle. Also, the front bumper was built to bolt on to the stock brackets. It can be removed and replaced with an OEM bumper.

Auto Services in Wyoming

White`s Energy Motors ★★★★★

New Car Dealers, Used Car Dealers, Auto Oil & Lube
Address: 203 Motor Ct, Gillette
Phone: (307) 687-0499

Wagner`s Service ★★★★★

Auto Repair & Service, Tire Dealers
Address: 1005 Pine Ave, Frontier
Phone: (307) 877-4526

Patrick Towing And Recovery LLC ★★★★★

Auto Repair & Service, Automotive Roadside Service, Truck Equipment & Parts
Address: 3193 State Highway 89 N, Evanston
Phone: (307) 679-3104

C Bar H Towing and recovery ★★★★★

Auto Repair & Service, Locks & Locksmiths, Towing
Address: 315 W. Jefferson rd, Granite-Canon
Phone: (307) 631-7391

Wyoming Automotive Co ★★★★

Automobile Parts & Supplies, Auto Body Parts, Automobile Accessories
Address: 205 E University Ave, Rock-River
Phone: (866) 595-6470

Complete Car Care ★★★★

Auto Repair & Service
Address: 411 E River St, Saratoga
Phone: (307) 326-8085

Auto blog

2014 Toyota Corolla shows just enough to keep us interested

Tue, 21 May 2013

To date, the best idea we have of what the 2014 Toyota Corolla will look like is the shape and styling of the Furia Concept from this year's Detroit Auto Show. Obviously the compact car will turn down the wick a fair bit from that orange machine, and now we have one more scintilla of an idea of what the final product will look like.
Published today on Toyota's official Facebook page, the image above clearly shows the rear quarter of the 2014 Corolla S. Though the low angle is pretty wonky, we can make out that the shape of the taillight cluster is very similar to that of the Furia, albeit without the same LED treatment, A hint of a trunk-lid spoiler is also in evidence, and also follows the Furia's lead.
Toyota points out that the new Corolla will be shown in earnest on June 6. Expect to see the full version of the car by that date at the latest - online leaks have a tendancy to speed these things up.

2014 Toyota Aygo marks the spot [w/video]

Tue, 04 Mar 2014

Following the leaked pictures we showed you yesterday, we have the full battery of images and info of the all-new Toyota Aygo, in addition to our gallery of live photos from the floor of the Geneva Motor Show.
Like its cousins from Peugeot and Citroën, the Aygo foregoes a diesel engine in favor of a highly efficient gas powerplant. The 1.0-liter naturally aspirated 4-cylinder turns out 68 horsepower and 70 pound-feet of torque. When it hits the market, it'll be with either a five-speed manual transmission or a five-speed, X-Shift automated manual. The former will help the Aygo return 57.3 miles per gallon and hit 62 miles per hour in 14.2 seconds. Opting for the X-Shift variant will net drivers 56 mpg, with 62 arriving in a leisurely 15.5 seconds.
We'll admit, aside from the fuel efficiency, there's nothing terribly great about those numbers. Still, with its compact dimensions - it's only 136 inches long - and a curb weight of no more than 2,000 pounds, it should prove tossable in the bends.

Toyota investing $200M in Southern manufacturing

Sun, 23 Jun 2013

Over the past two years, Toyota has invested more than $2 billion at its North American production facilities, and it apparently doesn't plan on stopping there. To keep up with recent strong sales, Toyota is investing an additional $200 million at its engine plants in the Southern US to increase production capacity of its V6 engines.
The bulk of this money ($150 million) will go to expand Toyota's engine plant in Huntsville, AL, which is currently responsible for supplying engines - four-cylinder, V6 and V8 - to eight of Toyota's 12 domestically produced vehicles. That includes the best-selling Toyota Camry (shown above).
Toyota didn't say exactly what improvements are being made to the plant, but this follows last year's $80 million investment in the plant that is set to be completed by next year raising the engine capacity to 750,000 annual units including 362,000 V6s. The remaining $50 million will go to the casting plants of Toyota-owned Bodine Aluminum in Missouri and Tennessee, which supply engine blocks and cylinder heads to the Huntsville engine plant as well as others in Kentucky and West Virginia. Scroll down below for the official press release.