72 Fj40 Project With Re-built 3fe on 2040-cars
Scottsdale, Arizona, United States
Located in Scottsdale Arizona. Asking $20,000
More pictures will be added soon. Full frame off restoration that is not finished yet. This was an AZ truck. Re-built 3FE Conversion, Front Discs, 4 Speed Transmission with re-built 3 speed Transfer Case. All Mechanical was done by a Toyota Master Mechanic. Pros: full frame off resto, freeborn red, rino lined black inside, hell for stout leveler spring lift, gauges, knobs, steering wheel, windshield wiper, seats all restored, New OCD black soft top, new real steel bows painted black, later model rollbar installed, front disc brakes from a 60 refurbished and installed, rebuilt( by man a fre ) 3fe with all new sensors injectors etc with about 4000 miles on since rebuild, all new tie rod ends installed, 4 speed transmission with re-built 3 speed transfer case installed, harness wiring all inspected rewrapped and repaired before installing, all new light fixtures and all work, new agm battery, 5 new imported 16' split rims with new Hercules bias ply's installed, 3 hard doors that need work but little rust, Long rear seats that need resoration, curisreparts 3fe conversion harness all installed with relays, original 3fe engine harness all installed, in the process of installing charcoal canister on frame, 4 speed transfer linkage is being cleaned up and restored, new clutch, re-built brake booster, new fuel tank, new oem front bumper,new windshield and new stainless bolts throughout. Cons: PO did use some bondo on the rear quarters but no sign of rust under the bondo - I think they just wanted to make it all nice and smooth. The few holes that I drilled to install the rear barn doors yielded no rust. Barn doors are lined up about a 1/4 inch off - I have tried to fix but can't- I think again that the PO installed a new rear seal too high which affected the barn doors and also the spare tire latch. Some scratches that occurred during install of parts. It needs brake master, clutch master and slave, clutch fork and bearing installed brake lines and fuel lines, fuel pump and pre-pump filter, lines for fuel separator and fuel return installed on the fuel tank, drive lines shorted and lengthened and radiator and fan shroud installed to get running. It's real close to being running and a great rig. Clear New Mexico Title. I started the restoration while I lived in NM. You will have to arrange for your own shipping. Please ask questions! On Jun-15-14 at 06:44:29 PDT, seller added the following information: Located in Scottsdale Arizona. Asking $20,000 On Jun-15-14 at 06:53:46 PDT, seller added the following information: Located in Scottsdale Arizona. Asking $20,000
More pictures will be added soon.
Full frame off restoration that is not finished yet. This was an AZ truck. Re-built 3FE Conversion, Front Discs, 4 Speed Transmission with re-built 3 speed Transfer Case. All Mechanical was done by a Toyota Master Mechanic.
Pros: full frame off resto, freeborn red, rino lined black inside, hell for stout leveler spring lift, gauges, knobs, steering wheel, windshield wiper, seats all restored, New OCD black soft top, new real steel bows painted black, later model rollbar installed, front disc brakes from a 60 refurbished and installed, rebuilt( by man a fre ) 3fe with all new sensors injectors etc with about 4000 miles on since rebuild, all new tie rod ends installed, 4 speed transmission with re-built 3 speed transfer case installed, harness wiring all inspected rewrapped and repaired before installing, all new light fixtures and all work, new agm battery, 5 new imported 16' split rims with new Hercules bias ply's installed, 3 hard doors that need work but little rust, Long rear seats that need resoration, curisreparts 3fe conversion harness all installed with relays, original 3fe engine harness all installed, in the process of installing charcoal canister on frame, 4 speed transfer linkage is being cleaned up and restored, new clutch, re-built brake booster, new fuel tank, new oem front bumper,new windshield and new stainless bolts throughout.
Cons: PO did use some bondo on the rear quarters but no sign of rust under the bondo - I think they just wanted to make it all nice and smooth. The few holes that I drilled to install the rear barn doors yielded no rust. Barn doors are lined up about a 1/4 inch off - I have tried to fix but can't- I think again that the PO installed a new rear sill too high which affected the barn doors and also the spare tire latch. Some scratches that occurred during install of parts.
It needs brake master, clutch master and slave, clutch fork and bearing installed brake lines and fuel lines, fuel pump and pre-pump filter, lines for fuel separator and fuel return installed on the fuel tank, drive lines shorted and lengthened and radiator and fan shroud installed to get running. It's real close to being running and a great rig.
Clear New Mexico Title. I started the restoration while I lived in NM. You will have to arrange for your own shipping. Please ask questions! |
Toyota Land Cruiser for Sale
- 1969 toyota land cruiser fj-40
- 2011 toyota land cruiser 4wd navigation,sunroof and dvd player(US $54,900.00)
- 1970 toyota land cruiser fj40 with 305, runs like a top
- 1979 toyota fj40 landcruiser jeep with cummins turbo diesel
- (US $7,999.00)
- 1980 toyota land cruiser fj45 single cab pickup 2-door 4.2l (landcruiser)
Auto Services in Arizona
Vince`s Automotive Repair ★★★★★
Ultimate Imports ★★★★★
Tire & Auto Service Center ★★★★★
The Ding Doctor ★★★★★
Team Ramco ★★★★★
Stockton Hill Tire ★★★★★
Auto blog
Toyota promises Hybrid-R concept for Frankfurt
Thu, 08 Aug 2013Toyota will be bringing a new concept car to the Frankfurt Motor Show next month. Dubbed Hybrid-R, Toyota says the concept will feature the same Toyota Hybrid System-Racing tech found in the automaker's latest endurance car, the TS030 Hybrid.
That car took second place at the 24 Hours of Le Mans, with a gas-powered, 3.4-liter, naturally aspirated V8 and a capacitor-based hybrid system. The result was 530 ponies from the engine and an extra 300 horsepower from the electric motor and batteries.
Toyota's press release came with but one image, a new Hybrid badge which is a far cry from the Hybrid Synergy Drive label found on the automaker's other offerings. There's really not much else to go on yet, but the news that Toyota is already adapting its racing tech for a concept bodes well for the future of exciting, hybridized offerings from the automaker. We'll be at Frankfurt live, and will be sure to bring you all the news on this new concept as it becomes available.
Airbag recall widens to include BMW, Chrysler, Ford and Toyota
Mon, 23 Jun 2014The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a roll in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time.
BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall.
Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands
Union to launch Toyota organization drive in Canada
Sun, 12 Jan 2014Toyota may be heading toward some labor issues in the Great White North, as employees at a pair of Canadian Toyota factories may be set for a certification vote. The Unifor union, which was the result of a merger last year between the Canadian Auto Workers and the Communications, Energy and Paperworkers union, will be holding the vote.
Over 40 percent of the employees at the Woodstock and Cambridge, Ontario factories have signed union cards, cresting the minimum percentage required to instigate a legal certification vote, according to Reuters. The Woodstock factory is responsible for RAV4 production, while Cambridge builds the Lexus RX350 and RX450h, as well as the Toyota Corolla. The two factories employ nearly 7,000 people.
It's unclear when the union will hold a certification vote at the two factories, but what is rather clear are the worker complaints. Employees are concerned about workers being hired on temporary contracts which lack the benefits of full employment, John Aman, head of organizing for Unifor, told Reuters.