2013 Volkswagen Jetta Hybrid Only 490 Miles Gas/electric 48 Mpg on 2040-cars

Auto blog

Prop-driven VW Beetle hopes to land in Bonneville [w/video]

Sometimes you meet folks who, when they tell you "Hey, I have an idea," your reflex response is to stop what you're doing and tell yourself, "Get ready...." We imagine Mike Niemans is one of those folks, and the idea in question is putting a tank engine on a Type 1 Volkswagen Beetle. Not just any old tank engine - as if there were such a thing when we're talking about putting them in cars - but a 668-cubic-inch, 220-horsepower radial engine built by Continental in 1941 and procured from an M2 tank.
In the image above Nieman is using the tank clutch hub to get the motor set up, but in one of the images below you can see what really belongs back there is: a two-inch, reverse-pitch prop taken from a wind generator. He says there's enough mojo with the propeller action to get the car rolling down the runway like a jet when he gives it gas - and speaking of gas, the engine's been refitted to run on propane.
After a few safety tweaks Nieman's going to take the matte-black Beetle to Bonneville, "put the prop on, let her go and see what happens!" We can't wait to see the video of that. There are two shakedown videos below to get you ready.

Get ready to Camino-ize your fourth-generation VW Jetta with this kit

Inexpensive, small pickup trucks used to be everywhere in the US, whether they were from Japanese brands like Datsun or Toyota, the truly weird Subaru Brat or even from Europe with the Volkswagen Caddy based on the Golf. These days that market has completely disappeared, but if you're willing to pick up some tools to build your own, there's a company out there bringing the Caddy back as a kit for the Jetta.
Mark Smith knows a thing about building a vehicle at home. He has over two decades in the DIY-car business as a co-founder of Local Motors and the company that became Factory Five Racing. His latest venture is Smyth Performance and already offers a mid-engine, VW-based kit called the G3F. His new product, though, started as a fluke. "I just wanted a shop truck," said Smith to Autoblog. He already had a Ford F-450 but found that he was driving around with the bed empty most of the time. The result was a pickup truck based on the fourth-generation Jetta that he dubbed the Ute.
The kit retails for $3,500 and ships in three, big boxes, and it's designed to be built and painted in a weekend. Buyers get fiberglass exterior panels, a fiberglass rear window surround, sliding rear window, an aluminum reinforced bed with a tubular steel subframe, taillights, a fully functional steel tailgate, and other parts. In the end, you get a vehicle with a six-foot bed and a payload of around 700-750 pounds. The Ute maintains all of the factory suspension, fuel tank and emissions equipment and requires just a few cuts in the body to complete. "We did a modern Caddy," admits Smith.

VW to unveil diesel-electric Twin-Up! in Tokyo

We've received multiple reports that Volkswagen will be bringing a diesel-electric concept to the 2013 Tokyo Motor Show, set to take place later this month. The car, called the Twin-Up!, is based on the Up! city car, with some sources claiming this is a thinly veiled concept that will eventually enter production.
According to Automotive News Europe, the Twin-Up! will reportedly return 214 miles per gallon on the US cycle by combining an 800-cc, two-cylinder diesel and an electric motor. It will also boast plug-in capabilities, and will be able to cover 30 miles on electric power alone.
Autocar has a more complete picture of the Twin-Up!'s powertrain, though, claiming it's a modified version of the hybrid system found in the Volkswagen XL1. The Twin-Up! will get a more potent, 47-horsepower electric motor to the XL1's 27-hp unit, but will retain that car's 47-hp turbodiesel. The battery pack will also grow, from 5.5 kilowatt hours to 8.6 kWh. Both of these increases are necessary due to the increased weight of the Twin-Up! - it's some 900 pounds heavier than an XL1.