Find or Sell Used Cars, Trucks, and SUVs in USA

1987 Chevrolet C-10 Pickup on 2040-cars

US $11,800.00
Year:1987 Mileage:60000 Color: Red /
 Red
Location:

Lipan, Texas, United States

Lipan, Texas, United States

If you have any questions feel free to email me at: rosalynrddegennaro@mancityfans.com .

STOP! Please Read. THIS IS NOT A FIXER or Missing Parts - It is ready to go! This Pickup has a .030 over 350
late model roller block with 3.75 crank = 383 cubic inches. The kit installed produces 500+hp. It will spin the
325/50/15 Mickey Thompsons. No shortcuts were taken. This is my 4th square body. This pickup has a relatively new
paint job - Great Condition. I get at least 1 thumbs up when I take it out. Idles Rough – Great for local Hot
Rod night. Is my toy - Garage kept. Uses super unleaded. Drives Great – AC is cold.

ENGINE: 383 late model 4 bolt main roller block. Forged Probe Pistons – Scat 9000 crank and 7/16 bolt 5.7 rods.
Bought a “balanced” assembly but had it checked locally and paid for it to be race balanced. Block deck to
.020 piston height. Heads are Edelbrock 210 heads (large valve springs for roller cam)– looks like a Victor Jr.
with straight plugs. Edelbrock Roller cam .538/ 548 lift - #2204 in Summit Racing. Trickflow hydraulic roller
lifters and pushrods. Summit 1.5 roller rockers. Edelbrock RPM Air Gap matched to heads – topped by a Holley 750
HP and K&N air filters. Protonix HEI Distributor.

DRIVELINE: TCI 3500 stall Torque Converter with plate and has lockup. Racing transmission built by a pro. 91 700
R4 4x4 transmission converted to 4x2 – look at the pictured converter cover it is cast aluminum. Bought Monster
in a Box with all the best components – shifts great. Installed B&M ratchet pickup shifter (the best solution).
Has Derale pan with cooling tubes. I have been through 7 transmissions and this is the only one that has lasted.
Aluminum SSR drive shaft was bought new - its light and gorgeous. Rear end is a 12 Bolt Truck with 4:11 Gears and
an Eaton Posi unit (it holds). Traction Bars. Has Aluminum support housing cover. Aftermarket 10 axles driving
Weld Wheels and 325/50/15 Mickey Thompsons. Flaming River drop spindles and springs - rear has a flip kit. Hedman
Hedders 1 3/4 long tube going into 3" exhaust with Magnaflows with turndowns.

BODY: 1987 Chevy R10. Still have owner’s manual. New Bumpers front and back. Recent ball joints and braking.
Aftermarket grille, plate trans cooler, large Champion aluminum radiator – 2 electric fans controlled by heat
switch for cooling; serpentine belt system, late model aluminum AC compressor. 2 fuel tanks with electric pumps
and an exterior MDS booster pump. Body was extremely straight when I bought it and only needed a little body work.
Body was painted original red with clear coat.

INTERIOR: Was removed – new sound material under new carpet and door panels. New Carpet and headliner. Seat is
in very good condition – interior still smells new. All gages work – including 10k rpm tach with working shift
light. After market stereo with CD. Clear Texas title - in my name.

Auto Services in Texas

XL Parts ★★★★★

Automobile Parts & Supplies, Automobile Accessories
Address: 2416 N Frazier St, Cut-And-Shoot
Phone: (936) 441-3500

XL Parts ★★★★★

Automobile Parts & Supplies, Automobile Parts, Supplies & Accessories-Wholesale & Manufacturers, Used & Rebuilt Auto Parts
Address: 6450 Midway Rd, Blue-Mound
Phone: (817) 924-0099

Wyatt`s Towing ★★★★★

Auto Repair & Service, Towing, Locks & Locksmiths
Address: 1210 N US Highway 69, Flint
Phone: (903) 569-6060

vehiclebrakework ★★★★★

Auto Repair & Service, Brake Repair
Address: Aldine
Phone: (956) 251-3140

V G Motors ★★★★★

Auto Repair & Service, Automotive Tune Up Service, Automobile Air Conditioning Equipment-Service & Repair
Address: 10710 W Bellfort St, Houston
Phone: (281) 498-0909

Twin City Honda-Nissan ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 10549 Memorial Blvd, Monroe-City
Phone: (409) 981-1220

Auto blog

Next Corvette ZR1 to get 700 horsepower?

Tue, 19 Feb 2013

Word has it General Motors may offer as much as 700 horsepower in the C7 Corvette ZR1. Motor Trend reports the next Corvette Z06 will continue to rely on its naturally aspirated 7.0-liter V8 engine for thrust, but the lump will deliver substantially more power. How much more? MT says the engine could deliver up to 600 ponies. That's a jump of 95 horsepower over the current Z06, though no figures have been finalized as of yet. Right now, GM is reportedly waiting to see what sort of grunt it can glean from the next ZR1.
The automaker has already made it clear it will resurrect the LT5 name for the new supercharged V8, and if GM is already pulling 600 from the Z06, the big dog ZR1 would theoretically offer 700 horsepower. Either way, the range-topping Corvette will be suitably insulated from its less potent siblings. Stay tuned. We aren't likely to see the Z06 for at least a year, with the ZR1 trailing along at some point there after.

2014 Chevrolet Corvette Stingray Convertible gives us a couple of looks

Sat, 02 Mar 2013

Put away your pixel paintbrushes, kids. Pack up your Photoshop. This is the real-deal 2014 Chevrolet Corvette Stingray Convertible in its first official images. The droptop Chevrolet will roll into the bright lights of the Palexpo exhibition at next week's Geneva Motor Show, a four-wheeled statement of intent that General Motors is serious about taking its Corvette franchise global.
Chevy isn't providing anything in the way of further details with these two shots, but we've learned at least a couple of things about the car shown here. First off, the example seen in these images is fitted with the optional Z51 Performance Package - something that isn't immediately evident because there's no sign of the coupe model's prominent ductwork on its rear haunches. In order to accommodate the power folding hard tonneau cover, the vents that feed the transmission and differential coolers have been relocated to the underside of the car. The dark paint color on this example also does a good job of muting the contrasting black front fender vents and hood opening - Z51-spec design details that have proven to be somewhat controversial.
One other thing to note: These two shots also display the Stingray wearing different alloy wheels than the split five-spoke design shown at the hardtop's Detroit Auto Show unveiling in January. The simpler, thin five-spoke wheels should do a good job of showing off the Z51's upgraded brakes, and they'll be optional on the coupe as well.

Chevy monitors drivers' biometrics while experiencing new Corvette Stingray

Fri, 25 Oct 2013

We tell you about what a car is like to drive every day, remarking on throttle response, steering weight and feedback, squat, dive, brake fade and a dozen or more other factors of performance. What we can't tell you, though, is what the car does to us - how its performance impacts us, physically. That's what makes this video series from Chevrolet so darn cool.
The Bow-Tie brand rented out Spring Mountain Motorsports Ranch, got several (very) different individuals together, strapped a bunch of sensors to their bodies to record biometric data ranging from heart rate to respiration to brain activity, and then handed them keys to the new Chevrolet Corvette Stingray. The results are explained in a series of videos, devoted to each driver, showing how different people react to the Corvette's performance.
If, like your author, you're a nerd for medical science, this is going to be a fascinating set of videos. If not, it's still pretty cool to see how the body of someone with racing experience, like Gran Turismo creator Kazunori Yamauchi, reacts to tracking a car like the Corvette Stingray compared to the owner of legendary Detroit barbecue joint, Slows BBQ. Take a look below for all six videos from the series, or hop over to the Corvette Vimeo channel for the interactive experience, where you can see all the different metrics.