1970 Chevelle Ss Clone Project on 2040-cars
Bloomfield, Iowa, United States
Body Type:2 door
Engine:350 v8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 8
Model: Chevelle
Trim: 2 door
Drive Type: automatic
Mileage: 99,801
Sub Model: Malibu
Disability Equipped: No
Exterior Color: Gray
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Black
I have here one 1970 chevelle that started its life as a malibu and frame off restoration to make an SS clone has been started ,Body was removed from frame and was sand blasted and powder coated and painted silver. owner was going to do silver and black SS clone. everything has been replaced on frame the front suspension has all been rebuilt, new springs, shocks, bushings, everything. the rearend was rebuilt and all new shocks and springs on rear as well.body has been sit back on car for transport only! does include all new body mounts and bushings as well. Motor is # matching 350 that was completly rebuilt with all new parts 30 over, alum hi-rise elderbrock carb and new hei conversion. trans was rebuilt and is the original turbo 350. there has been a ton of work done on this car and alot of money and hours getting the frame in rolling completion. car has front disc brakes and drum rear. there are alot of new parts that come with car, new radiator ,fuel tank, all new stainless brake lines, new bf goodrich tires that have never seen the road has rally wheels. seats have been professionally recovered front buckets and rear all new backs and hardware. interior is perfect only needs headlinner and carpet.dash is perfect as well. dash pad has no cracks. all glass in car is perfect and have all window trim. like new complete and functioning cowl induction hood. front fenders are from cali and are perfect with no rust ,doors are solid and complete. trunk lid has no rust issues,SS grille is pefect. bumpers are in decent condition. car is mostly complete only missing very little like inner wheel wells. the washer motor and power brake master cylinder is new as well.now the bad!! the body hung on a rack and nothing was done with it, so it will need some rust repair or replacement in the floors and trunk car includes most of what you need to repair floors and comes with a new trunk pan, car will also need quarter work or replacement as well. original owners manual and protector plate is there and clean and clear title. theres still alot of work to do to make it a really nice ride, but if you have ever done a frame off then you know alot of the really hard work has already been done. car is for sale locally as well so i reserve the right to end auction early. please only bid if you have the funds to buy! again please make sure you have the means to pay for car. there will be a 500.00 non refundable deposit required within 24 hours of auction end and balance due within 7 days of auction end. this car was originally butternut in color and black interior. wanted to ad the fenders and doors are only hanging by a couple of bolts for shipping only.
On May-21-13 at 18:22:53 PDT, seller added the following information:
I have most all the parts for this car the console shifter plate is in the glovebox, have all seatbelts ,beauty rings, headlight trim, and the list goes on and on.
Chevrolet Chevelle for Sale
- 1971 chevrolet chevelle big-block 396 factory a/c(US $22,000.00)
- 1967 chevelle ss 396 4 speed #'s matching nut and bolt restoration blue on blue
- 1969 chevelle 396 ss
- 1965 chevelle 300 deluxe
- Curella's classics presents a 1972 chevrolet chevlle ss 454 tribute
- 1967 true super sport chevelle, 396, 4 speed, collector's dream car!
Auto Services in Iowa
Truck Equipment Inc ★★★★★
Super Lube ★★★★★
R S Wrecker Service ★★★★★
Premier Automotive ★★★★★
Paz Automotive ★★★★★
Metro Glass Omaha ★★★★★
Auto blog
Subprime financing on the rise in new car sales, leasing too
Fri, 07 Dec 2012We all remember the financial crisis that began several years back. At its core was a splurge of subprime lending for housing loans. The housing bubble burst, triggering a collapse of the mortgage-backed securities market. Apparently, those types of loans still exist in the automotive industry, and the market share for these types of "nonprime, subprime, and deep subprime," loans has grown 13.6 percent compared to the third quarter a year ago.
According to an Automotive News report, high-risk lending expanded to 24.8 percent of total loans in Q3, up from 21.9 percent for this time last year. As this level increased, average credit scores of borrowers dropped to 755, down from 763 a year ago. In that time, the average financing amount increased $90 per vehicle, to $25,963.
At 818, Volvo maintains the highest per-owner credit score, while Mitsubishi has the lowest, at 694. The highest rate of borrowers was at Toyota, with 14 percent of the market, followed by Ford with 13.1 percent and Chevrolet at 11.1.
Amelia Island 2013: Chevrolet Corvette Sting Ray from concepts to split windows
Wed, 13 Mar 2013While this year marks 60 years of the Chevrolet Corvette, the 2013 Amelia Island Concours d'Elegance focused on one of the coupe's most sought after models, the 1963 Sting Ray. General Motors design boss Ed Welburn was on hand to show off the all-new C7 Corvette, but even the hard-edged styling of the 2014 Stingray couldn't take away from the beautiful 1963 models sitting out on the field.
In addition to the original Sting Ray and the 1959 Sting Ray Concept, some of the other classic 'Vettes included "Big Tank" racecars, an interesting cutaway coupe, a right-hand-drive Z06 and the attention-grabbing 1963 Corvette Rondine by Pininfarina. Another impressive Corvette was the 1964 Corvette XP-819 rear-engine prototype. Owner Mike Yager had the car finished as a driving chassis for this year's show, but promises the car will be back to its original glory in time for next year's event.
More Corvette Stingray Factoids: Vanishing panel gaps and 26-mpg LT1
Thu, 28 Feb 2013During January's Detroit Auto Show, we managed a longer than expected wandering tag-team interview with C7 Corvette chief engineering exec Tadge Juechter (pictured above), and LT1 engine boss Jordan Lee (pictured below). They are, quite honestly, two of the very nicest bigshot lads to ever walk the engineering corridors of an American manufacturer. Both are enthralled by what they're doing for a day job. So are we.
We've followed the pre-sale anticipation for the Chevrolet C7 Corvette Stingray like an Oreck vacuum yanking every speck of dirt from a well-trampled carpet. Everything is reportable and contains a grain of further knowledge about this dramatically important and cheered-for car, as it continues to be pressured into representing all that is superior about the American dream. The Corvette wears one heavy cloak.
So, most of what was talked about has been expertly reported already right here on Autoblog. But, looking through our notes again, both Jeuchter and Lee added facts to the buzzing mix.