1947 Dodge Power Wagon Wdx on 2040-cars
Fredericktown, Pennsylvania, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:none
For Sale By:Private Seller
Make: Dodge
Model: Power Wagon
Cab Type (For Trucks Only): Regular Cab
Trim: WDX
Options: 4-Wheel Drive
Drive Type: 4x4
Mileage: 43,019
Disability Equipped: No
Exterior Color: Red
Warranty: Vehicle does NOT have an existing warranty
1947 Dodge WDX Power Wagon. Built as restomod, built from frame off, needs engine and driveshafts and some minor finishing.
Frame was reinforced by previous owner, excellent condition, no rot, holes, or patches, very solid. Frame is setup for use with either stock steering box or Helitool style power steering conversion.
Title: Clean PA title
Driveline details: Set up for 360 Chrysler V-8 small block and A518 automatic overdrive transmission. Engine is NOT included. The A518 trans IS included. The transmission has 0 miles on professional rebuild by a local automatic transmission shop, all new wear parts, new torque converter for use with 360 engine, towing shift kit installed, deep sump transmission pan with drain plug installed. The transmission also has a kit installed to operate the overdrive without a vehicle computer. This truck has been retrofitted with Dana axles. Dana 60 front axle, Dana 60 rear axle, 4.10 ratio, disc brakes on the front axle, drum brake on the rear, new brakes all the way around, new wheel cylinders and hardware kits on rear brakes. I have the Warn hubs for the front axle, they just have not been reinstalled. Stock 1 3/4" leaf springs rebushed as needed with bronze bushings, new U-bolts and tie plates. This truck has 8 lug aluminum Vision 19.5" wheels on it with good tires. There is also an extra 19.5 wheel and tire for a spare that goes with the truck. The transfer case in this truck is a divorced NP205, 0 miles on professional rebuild, modified for twin stick operation so the original twin stick shifter can be used. Shifter mechanism is included, as well as motor mounts and transmission mount. So basically, bolt the transmission to a 360 engine, put the mounts on, and it all bolts in fast and easy. Exhaust system is already under the truck for use with small block Chrysler V-8 with stock manifolds.
Fuel system: This truck has a custom stainless steel gas tank built from dimensions of an original steel tank. Brand new VDO fuel sending unit, electric fuel pump not included, but mounting bracket is there under chassis, and a brand new Holley fuel pressure regulator is on the firewall.
Electrical system: Custom aluminum instrument panel, has new speedometer, fuel level, fuel pressure, voltmeter, amps, coolant temperature, oil pressure, oil temperature. There is also a brand new universal harness and fusebox kit installed. All wires are labeled to where they are supposed to go to simplify completion. It is setup with modern blade style fuses. There is also an MSD StreetFire capacitive discharge ignition box mounted in the cab as well as an MSD Blaster 2 coil mounted on the firewall. This system greatly simplifies the ignition wiring circuit, eliminates the need for a ballast resistor, and will work with the stock Chrysler Corp distributor. I will include all the lighting I have for this truck.
Brake system: This truck has been setup with a universal brake pedal kit as well as dual line power brake system. The brake booster is a 7" dual chamber vacuum booster and is rated for a 1 ton truck. It uses a 1 ton GM truck dual chamber master cylinder, also included. There is a Wilwood adjustable proportioning valve mounted on the firewall to simplify use and to fine tune braking bias as needed. All you need for the brake system is to make up the steel brake lines.
Interior: Custom diamond plate aluminum interior, needs very minor finishing but all there. I also have the original interior pieces from this truck that are in very nice shape. They can go with the truck if requested as I have no use for them. The seats are original bucket seats for a '78 Dodge Lil Red Express/Warlock. Very nice shape for original, not all tore up, just minor wear. Also included, overhead mounting box for CD player, floor mount emergency brake handle, aluminum floor pans, original transmission tunnel (floor and tunnel bolt in these trucks). Door glass is original and in good useable condition, rear window and gasket are brand new. The windshield frame was perfect with no rot, which is hard to find one in such good shape, it was bead blasted, repainted, brand new glass professionally installed and sealed, brand new windshield frame gasket, original regulator included, regulator still works.
Cooling system: This truck has a brand new aluminum radiator fitted to the original rad support for use with the modern engine. It has a Moroso inline fill neck, as well as a Zirgo 16" reversible electric fan, 3300cfm airflow. There is also an aluminum automatic transmission cooler mounted to the radiator.
Body: Body all done and painted except for the fenders. All sheetmetal was blasted before refinishing. The bed is not an original bed, but was fabricated from 1/8" plate to look like the original bed. It uses the original rear Power Wagon fenders, which are included. They are blasted to raw metal and are in excellent shape overall, would be very easy to finish for installation. The front fenders are also blasted clean with all mounts removed prior to blasting. All parts removed will obviously be included. The front fenders need patches in the bottoms like most Power Wagon fenders do, but it is also an easy fix. The inner fender panels are included and just need paint. The rest of the body is primed and painted Toreador Red, single stage urethane. Two small spots could need touched up on the bed, I have leftover paint I will include. Fabricated steel tailgate, skinned in aluminum diamond plate. Aluminum diamond plate bedrail covers and stake pocket covers. Diamond plate aluminum running boards, polished aluminum battery box.
I have other miscellaneous spare parts that go with this truck to aid completion. Basically, whatever else I have for the truck will be included. I will also include a brand new Saginaw counterclockwise rotation power steering box that is needed for power steering conversion if desired.
There was a lot of work in this truck to get it to this point. All the hard and dirty work has been done, I have just lost interest in the project. This is a very good deal for someone who wants to get into flatfender Power Wagons or someone who knows these trucks and is considering modifying one for everyday highway use. And anyone who knows these trucks knows what it costs to convert these trucks to disc brakes, V-8 upgrade, power steering, and whatever else to operate safely at highway speeds. Seriously interested buyers may contact Matt Maund (724) 554-4372 8AM-9PM EST with questions.
Terms of sale: Vehicle must be paid for via cash or cashier check before title is transferred. Buyer assumes all costs associated in transfer and titling, as well as transporting off premises. No Paypal or credit cards. Buyer is to contact me within 24 hours of purchase to arrange payment, title transfer, and pickup of the vehicle. Sold as is, no warranties expressed or implied, all sales final.
Dodge Power Wagon for Sale
1990 dodge power ram 150le, power wagon, ram 1500 mint condition low miles 4x4
1953 dodge power wagon base 3.8l
1948 w300 4x4 power wagon(US $12,000.00)
1986 lifted dodge power wagon 150 4x4 nice ride mud fest(US $12,500.00)
1974 dodge power wagon camper 7500 3/4 ton 440 4 speed dana 70 front srw
Powerwagon, cummins, 4x4, power wagon, diesel, lifted, classic, 3/4 ton, auto(US $7,000.00)
Auto Services in Pennsylvania
YBJ Auto Sales ★★★★★
West View Auto Body ★★★★★
Wengert`s Automotive ★★★★★
University Collision Center ★★★★★
Ultimate Auto Body Inc ★★★★★
Stewart Collision Service ★★★★★
Auto blog
Chrysler recalling 644k more Dodge Durango and Jeep Grand Cherokee SUVs over brakes
Wed, 02 Apr 2014Early last month, we reported on Chrysler issuing a preemptive, proactive recall for about 25,000 units of the Jeep Grand Cherokee and Dodge Durango. The issue revolved around a brake system that wasn't causing any actual problems, but delivered an unsatisfactory brake feel, so Auburn Hills called in a good 25,000 of SUVs around the world, including 18,700 in the United States.
Now Chrysler, having apparently determined that the brake problem on its sport utes is actually much bigger than it initially realized, has drastically broadened the scope of the recall. As a result, the National Highway Traffic Safety Administration has issued a recall for precisely 655,354 examples of the Grand Cherokee and Durango, covering the 2011 through 2014 model years. In addition, Chrysler is recalling 42,380 units in Canada, 21,376 in Mexico and 159,685 overseas.
The problem which Chrysler found revolves around the brake booster, whose center shell has been found to be subject to corrosion, allowing water to get into the brake system. That water in turn could freeze, preventing the brakes from working as well as expected.
MotorWeek proves '90s were awesome with Supra, Stealth, RX-7, Corvette, 968, 300ZX comparo
Thu, 24 Jul 2014Oh, the heady days of 1993, back when the Clinton Presidency was just getting underway, and it seemed like every hot new rock band was coming out of Seattle. Sports cars in the US had finally shaken off the shackles that slowed them during the '70s and '80s, and you could buy any number of legitimately quick vehicles again. MotorWeek recently went digging into its archives to find this six-model test from 1993 showing off some of the best semi-affordable performance coupes that money could buy at the time, and it's priceless.
Featuring the 1994 model year Toyota Supra in twin-turbo guise and MY 1993 versions of the Porsche 968, Nissan 300ZX TT, Mazda RX-7, Dodge Stealth R/T Turbo and Chevrolet Corvette LT-1, MotorWeek definitely covered all of the bases. One thing that might surprise younger readers is these cars' performance. The video only provides 0-60 acceleration times, but several of these vehicles would still be considered pretty potent today - over 20 years since going on sale. The Supra is especially impressive, hitting 60 miles per hour in just 5 seconds. Even today, that's nothing to sneeze at.
Given their performance potential and still-attractive looks, it's amazing that some of these coupes are old enough to drink now. The progress of interior design and safety equipment in the intervening years is pretty shocking, though. In most of these models, having two airbags is touted as a big deal. Scroll down to watch a Throwback Thursday blast from the past about some of the '90s best sports cars.
Chrysler earns $1.7B in 2012, revises product plans for US
Wed, 30 Jan 2013Hot on the heels of Ford's earnings announcement for the year that was, Chrysler today reported a 2012 net income of $1.7 billion, up substantially from the comparatively minuscule $183 million profit earned in 2011 when it repaid its US government loans.
Chrysler's good year ended with an excellent fourth quarter that saw net income rise 68 percent from $225 million in 2011 to $378 million. Where are all those extra earnings coming from? Market share, which Chrysler saw increase to 11.4% last year on sales of 1.65 million vehicles. In fact, the Auburn Hills, MI-based automaker out-paced the industry's market growth of 13 percent last year with sales up 21 percent for the year.
The company also revealed an updated product plan for its Chrysler Group and Fiat brands that looks all the way out to 2016. It's an updated version of the plan introduced in 2009 shortly after Fiat took control of the American automaker, and includes such new additions as an Alfa Romeo model, likely the 4C, to be introduced in the US this year, as well five more Alfa models by 2016. Likewise, Fiat will be growing by an additional seven models in the coming few years.