Find or Sell Used Cars, Trucks, and SUVs in USA

1923 Ford Model T All Steel All Original on 2040-cars

Year:1923 Mileage:200000
Location:

Hawley, Pennsylvania, United States

Hawley, Pennsylvania, United States

Very good original condition, runs and drives good electric start and hand crank both work well. There is a cracked rear window(see pictures)and the door glass is not in the car. I ordered new glass from macs auto and never got to installing it. the doors need new felt guides available from macs auto. the fuel tank was replaced with a new reproduction one the motor does not smoke and runs good. The wire harness was replaced and all the electrics work even the horn. The only rust is a spot on top of passenger fender and along the drivers fender on the main body. (see pictures) The interior is original other than I covered the original fabric with a fleece blanket, under the fleece there is some mouse damage. enough that I Felt it needed to be covered. The trunk floor needs some attention someone put down sheet metal but did not attach it. The paint is just flat primer. The tires and wheels are very good and the rear axle seals and brakes were replaced .  I have a clear title in my name and the numbers match the motor. I will not ship local pick up only! Iam at Hawley pa 18428. please feel free to ask any questions Thanks Steve.

Auto Services in Pennsylvania

Young`s Auto Body Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 111 S Bolmar St, Thornton
Phone: (610) 431-2053

West Shore Auto Care ★★★★★

Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: 736 State St, Carlisle-Barracks
Phone: (717) 730-7060

Village Auto ★★★★★

Used Car Dealers
Address: 52 Rocky Grove Ave, Oil-City
Phone: (814) 432-4509

Ulrich Sales & Svc ★★★★★

Auto Repair & Service, Used Car Dealers
Address: 4340 Morgantown Rd, Isabella
Phone: (610) 856-7050

Trust Auto Sales ★★★★★

New Car Dealers
Address: 1422 Trindle Rd Ste C, Plainfield
Phone: (717) 249-2667

Steve`s Auto Body & Repair ★★★★★

Automobile Body Repairing & Painting
Address: 115 Valley View Dr, Marwood
Phone: (724) 763-1333

Auto blog

How Ford made its 2015 Ford Mustang safer for toupee wearers [w/video]

Fri, 28 Feb 2014

Ford is ready to tell the story of its 2015 Mustang Convertible, the can't-miss bits being the easier, quicker and quieter roof operation, a more robust roof build for a coupe-like cabin noise, more trunk space, better visibility and reduced in-cabin buffeting. The top release system has been completely redesigned with a single, center-mounted latch on the windshield frame instead of the dual latches of before. The driver can now release the roof without having to lean over into the passenger space, after which the top goes down fully automatically with the press of a button. Ford doesn't say how long it takes to stow, but it's apparently done in half as much time as before, so figure around 8 seconds.
The roof uses a five-bow structure, with the fabric outer and full inner headliner sandwiching ten millimeters of insulation. Detailing work on the top has eliminated "unsightly folds" in the corners when the roof is up and made it more compact when down; its Z-fold assembly is 6.7 inches lower than before at its highest point when put down. Ford says the new electric drive internals make less noise when in operation, and the fully-finished droptop look is achieved with snap-in caps that flank the rear seating and stow in the trunk when not in use (the outgoing Mustang's top was higher and the front when folded and always looked like it was catching air and creating drag).
The compact roof and newly independent rear suspension setup in back means liberated trunk space, 11.4 cubic feet ready to swallow golf bags and tourist swag. You can read a lot more about it in the press release below, check it out in the short video of running footage and learn about the aerodynamic improvements made to the entire Mustang lineup that decrease drag and increase fuel economy.

Ford, Samsung shack up to bring regen braking to non-hybrid models [w/video]

Mon, 09 Jun 2014

Ford must be desperate to get itself ready for the beach this summer because it is really trying to get into shape. Shortly after unveiling the Lightweight Concept that cut the weight of a Fusion down to that of a Fiesta, it's now the rest of the line's turn for improvement. The company is wrapping up a 10-year research project aimed at developing next-gen automotive batteries to improve efficiency.
Ford claims that 70 percent of its lineup will have stop/start tech by 2017. The key to this massive proliferation is its new dual-battery system that combines a lithium-ion battery with a lead-acid one and regenerative braking. The setup works by harvesting braking energy and converting it to electricity. When the vehicle stops, the engine shuts off, but the Li-ion battery has enough juice to keep the accessories running. The engine starts up again as drivers take their foot off the brake. The layout would mean less wasted gas while idling. It's already available on Ford hybrids and is somewhat similar to the i-Eloop capacitor-based system from Mazda.
The bigger challenge is tuning the regenerative braking right. While hybrid drivers may be a little more adventurous, when it comes to getting a hang of regen braking, conventional buyers might not be so open-minded. The systems have a tendency to be a little grabby at first and then taper off at very low speeds. Ford needs to make sure it's just right to avoid turning off buyers.

Project Ugly Horse: Part VII

Fri, 12 Apr 2013

Devils, Details and Weight Reduction
There are many things I could call this exercise. A party is not one of them.
I've spent three days crammed in the axle well of this 1989 Mustang with nothing to keep me company beyond a trouble light, a DeWalt drill on the very last of its legs and billion razor sharp, red hot slivers of metal with an affinity for my most sensitive of regions. My joints are raw from crawling around on the concrete. I'm half deaf from the shriek of the spot weld cutter and the boom of the cold chisel and hammer.