Manual Convertible 3.8l Cd 4x4 Tow Hooks Power Steering 4-wheel Disc Brakes Abs on 2040-cars

Auto blog

Maserati Levante crossover not Jeep based after all?

Maserati has been teasing its crossover project since 2011, which is when it first showed off the Kubang concept (pictured above). Still, the production version, rumored to be called the Levante, remains a complete mystery. The CUV was first rumored to borrow the platform from the Jeep Grand Cherokee, but new rumors indicate that the Italian, luxury crossover might actually take the underpinnings from the Quattroporte and Ghibli.
In a brief interview, Maserati CEO Harald Wester told CNN Money that the Levante wouldn't use Jeep's platform. Motor Trend spoke with an unnamed Maserati engineer who confirmed the rumor. Officially, the company says that no decision has been made.
We can add this to another long list of rumors about the Italian CUV. It was originally supposed to be built at Chrysler's Jefferson North assembly plant in Detroit. Then, plans were changed to build it in Italy.

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.