1990 Mazda Rx-7 Convertible on 2040-cars
Harrisville, Rhode Island, United States
I am going to try and sell my 1990 RX7 Convertible N/A 5 speed. The car
is overall in good shape, it has normal wear for being 23 years old, meaning really small dings or other marks here or there still. Still looks very sharp though, and the interior is very clean. The top has a really small tear on each side right after the doors where the top folds. The tears are not really noticeable and not really a problem because of where they are it does not let water or anything in. 117,819
miles. Never driven in winter, and there is no rust problem under the car.
The car can be started and run for testing, but it cannot be driven. The main issue is that the coolant system is over pressurized, so a little after it hits operating temp the coolant will be forced out the overflow tank. It does not over heat, but you can hear the coolant boil in the system. From what I think, exhaust gases are getting into the coolant. I am not really an expert and only really work on motorcycles, so I am out of my league working on a rotary engine. The upper rad hose, rad cap, thermostat, are all new. The compression on both rotors is good. The convertible top is in good condition, along with the top's motors, and everything else like windows and heat and air conditioning work as they should. I used to have an after market stereo in there so the stock one is in now but not connected up. It works, but the headrest speakers will have to be reconnected to the assembly. 5 speed shifts well, no slipping. Title is clear, though I cant seem to find it but I have the registration. If title is needed I can get a duplicate. Two other small problems are that the oil pressure gauge reads 0, but that is not the case. Probably needs a new sensor because I tried cleaning the wire. The trunk hydraulics that keep it open are going, so you need to hold the trunk open sometimes. It has after market mufflers (duel) and a custom pipe from the cat back. It is not loud, but it is a nice low refined sound. I was planning on having it fixed but am going to be moving out of state within a a year, so I do not have the money to fix it, and cant really take it with me. Looking for $2,000 obo. Any other questions just ask and I will try and answer. Thank You for looking. |
Mazda RX-7 for Sale
- 1988 mazda rx7 convertable
- 1993 mazda veilside fortune rx7 (rx-7) - 595 rwhp - new house of kolor paint -(US $35,000.00)
- Fd3s mazda rx7 efini 1994 amemiya 20b
- 1993 mazda rx-7 r1 coupe 2-door 1.3l(US $34,000.00)
- 1989 mazda rx-7 turbo ii mostly original only suspension is modified.
- 95 fd rx7 with an ls1 v8(US $17,900.00)
Auto Services in Rhode Island
State Line Service & Tire Center ★★★★★
Smith Brothers Transmissions ★★★★★
Pride Chrysler-Plymouth ★★★★★
Miracle Auto Sales ★★★★★
Lisbon Tire ★★★★★
LGEE Auto Collision ★★★★★
Auto blog
Mazda6 diesel delayed until April
Fri, 13 Sep 2013Diesel enthusiasts waiting on the new Skyactiv-D-powered Mazda6 will have to wait a bit longer. The shapely fuel-efficient four-door has just had its North American launch pushed back to April, due to delays in emissions testing. Mazda had originally planned to launch the Mazda6 diesel before the end of this year, making the four- to five-month delay a rather serious one.
Mazda's senior vice president of US operations, Robert Davis, told Mazda employees in a letter obtained by Automotive News that, "final certification testing - the results of which are looking encouraging - is taking longer than we had initially expected." Following this letter, Mazda made an official announcement:
"The on-sale date for Mazda6 SKYACTIV-D clean-diesel has been moved to late-Spring 2014, to accommodate final emissions testing and certification. We are pleased with the ongoing development and are excited to launch this much-anticipated vehicle in North America. 2014 Mazda6 sales continue to exceed both our expectations and our production abilities, and supplies of the car are short at dealers across the U.S. More information on the SKYACTIV-D clean diesel Mazda6 will be available closer to the on-sale date."
Next Mazda MX-5 Miata headed for 2015 Chicago debut
Fri, 17 Jan 2014Twenty-six years after it was introduced at the 1989 Chicago Auto Show, the much anticipated fourth generation Mazda MX-5 Miata will meet the press at the 2015 Chicago show. A piece in Autocar refines some of the details on the larger, lighter Miata that a Mazda insider has said will be "our best-looking car ever."
The company has relented on the quest for the metric tonne, the 1000-kilogram (2,200-pound) target too difficult to achieve in light of cost constraints. You can still expect it to lose a generous dollop of weight - Autocar says a curb weight of 1,100 kg (2,420 pounds) will still make it the lightest in its class. And Mazda will be stressing a fun driving experience through light weight and a modest amount of naturally-aspirated horsepower. Engine capacities of 1.5 and 2.0 liters are expected. Sounds familiar (and good), right?
The Miata's interpretation of Kodo design will be veer from that found on the Mazda3 and Mazda6, with "very clean and simple" lines marking out "more muscular proportions" and elongated bodywork on a longer wheelbase. A stretched engine bay will make room for the current Skyactiv engine and perhaps the future Skyactiv 2 powerplants, initial reports suggesting there could be a 30-percent increase in fuel economy from the moment it arrives.
Mazda's Hofu plant builds its ten-millionth car
Wed, 28 Aug 2013Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.